期刊文献+

工程机械液压试验平台仿真研究 被引量:1

The Simulation of Engineering Mechanical Hydraulic Test Platform
下载PDF
导出
摘要 研究和开发通用化的液压系统动态性能试验台,在液压系统设计、分析和改进中具有十分重要的价值。以实际液压系统动态性能试验测试平台为研究对象,采用EASY5软件对系统中的关键元件进行精确建模,并完成系统的仿真模型的搭建。对系统进行仿真分析,并与实验测试数据进行对比分析,从而证明仿真模型的正确性。 Researching and developing universal dynamic test platform of hydraulic system can play an important role in designing、analyzing and improving of hydraulic system.In this paper,dynamic simulation of hydraulic system is studied with the use of the EASY5 software on the background of the actual dynamic platform of hydraulic system.In the software,we build precise model of the key component of the practical system,and complete to build the whole system model.Then,conducting the system simulation analysis and,compared with the experimental test data analysis,thus proofing the simulation model is correct.
出处 《液压气动与密封》 2011年第9期75-78,共4页 Hydraulics Pneumatics & Seals
基金 福建省科技重大专项(2008HZ0002-1)
关键词 工程机械 液压系统 动态性能 EASY5 仿真分析 engineering machinery hydraulic system dynamic performance simulation analysis
  • 相关文献

参考文献6

二级参考文献14

  • 1[1]D. McCloy and H.R.Martin. Control of Fluid Power: Analysis and Design [M] . Ellis Horwood Ltd, New York, 2 nd (revised) edition, 1980.
  • 2[2]R.H.Warring. Hydraulic Handbook [M] .Trade and Technical Press Ltd., Surrey, England, 8 th edition, 1983.
  • 3[3]K.A.Edge and D.NJohnston. The Impedance Characteristics of Fluid Power Components: Relief Valves and Accumulatior [J] .Proc. Instn. of Mech.. engrs., Part 1 Journal of Systems and Control Eng., 1991, 205 (11): 11~22.
  • 4[4]S.Manco and N.Nervegna. Pilot Operated Pressure Reduce Valve Computer Simulation vs Experimental Analysis [C] .In Proc. 2 nd Conf. Of Fluid Power, Hangzhou, China , pages 520-525, 1989.
  • 5[5]Y.C.Shin. Static and Dynamic Characteristics of a Two Stage Pilot Relief Valve [J] . Trans. of ASME, Journal of Dynamic Systems, Measurement and Control, 1991, 113 (2) :280~288.
  • 6[6]N.D.Vanghan, D.NJohnston, and K.A.Edge. Numerical Simulation of Fluid Flow in Poppet Valve [J] . Proc.Instn. of Mech.Engrs., Part. c Journal of Mech. Eng., 1992, 206 (c2): 119~129.
  • 7[7]C.W.Richards and K.C.J.Fung. Bath fp Manual Volume 3,The Bath fp Model Writer's Guide [C] .Fluid Power center,Univ. of Bath, Bath, England, 1' edition, 1991.
  • 8[8]C.W.Richards and D.G.Tilley. Bath fp Manual Volume 2, The Bath fp Model Reference Guide [C] . Fluid Power center, Univ. of Bath, Bath, England, 1' edition, 1991.
  • 9张利平.现代液压技术[M].北京:化学工业出版社,2004..
  • 10周士昌.液压系统设计[M].北京:机械工业出版社,2004..

共引文献36

同被引文献5

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部