期刊文献+

高强变形锌合金ZAT10的组织及TTT曲线

Microstructure and TTT curve of high-strength deformation alloy ZAT10
下载PDF
导出
摘要 以高强变形锌合金(ZAT10)为研究对象,通过热分析仪(DSC)、X射线衍射(XRD)、扫描电镜(SEM)和能谱仪(EDS)以及力学性能测试,研究了高强变形锌合金的相组成,并采用硬度法绘制ZAT10的TTT曲线。结果表明:高强变形锌合金ZAT10是由η锌相和(α+η)相的层片状共析体组织组成;ZAT10的时效孕育期从260℃至120℃经历先变短后变长的过程,在210℃左右的时效孕育期最短。 Microstructure of high-strength deformation zinc alloy ZAT10 were investigated by means of DSC,XRD,SEM and EDS,and its TTT curve was obtained by hardness method.The results show that the microstructure of ZAT10 alloy consists of η-Zn phase and lamellar eutectoid phase of(α+η).From 260 ℃ to 120 ℃,the age incubation period of the ZAT10 alloy decreases first to the minimum of 1.5 min at 210 ℃ and then increases with decreasing aging temperature..
出处 《材料热处理学报》 EI CAS CSCD 北大核心 2011年第9期78-82,共5页 Transactions of Materials and Heat Treatment
基金 国家科技支撑计划(2009BAE71B04 2008112006)
关键词 高强变形锌合金 ZAT10 TTT 曲线时效 组织 high-strength deformation zinc alloy ZAT10 TTT curve aging microstructure
  • 相关文献

参考文献15

  • 1LIN Gao-yong, ZHENG Xiao-yan, ZENG Ju-hua, et al. Microstructure and properties of extruded profiles of zinc-based alloys[ J]. Journal of Central South University : Science and Technology, 2008, 39 (2) :246 - 250.
  • 2琚宏昌.4×60M回转窑托轮轴瓦应用锌合金替代铜合金的可行性研究[J].安阳大学学报(综合版),2003(3):10-14. 被引量:14
  • 3黄国保.代铜高强度锌合金的研究[J].特种铸造及有色合金,1990,10(5):11-16. 被引量:10
  • 4BAO Xiao-bo, HUANG Qi-xing. Zinc Technical Economics in Tthe World[ M]. Beijing: Metallurgical Industry Press, 1996.
  • 5Dorantes-Rosales H J, Lopez-Hirata V M, Mendez-Velazquez J L, et al. Microstructure characterization of phase transformations in a Zn-22% Al-2% Cu[ J]. Journal of Alloy and Compounds, 2000, 3 (5) : 154 - 160.
  • 6Ma D, Li Y, Jones H, et al. Unidirectional solidification of a Zn-rich Zn-2. 17% C u hypo-peritectic alloy[ J]. Science and Technology of Advanced Material, 2001 (2) : 127 - 130.
  • 7林高用,肖弦,郑小燕.锌合金切削性能的研究[J].矿冶工程,2006,26(5):96-98. 被引量:12
  • 8Trantmann R. Metanwristchaft[ N]. Translation in Sheet Metal Industries, 1942: 143.
  • 9庞心志,曾建明.ZA27合金的耐腐蚀性能研究[D].南宁:广西大学,2006:8-11.
  • 10George C Sih, Shah Tung Tu, Zhengdong Wang. Muhiscaling asslciatied with structural and material integrity under elevated temperature:Fracture mechanics[ C]//Shanghai: East China University of Science and Technology Press, 2006.

二级参考文献24

  • 1琚宏昌.4×60M回转窑托轮轴瓦应用锌合金替代铜合金的可行性研究[J].安阳大学学报(综合版),2003(3):10-14. 被引量:14
  • 2杜挺.稀土元素在金属材料中的作用与机理[J].中国有色金属学报,1996,6(2):13-18. 被引量:84
  • 3廖乐杰,何福忠.稀土在铜及铜合金中的作用及其应用效果[J].特种铸造及有色合金,1997,17(2):52-53. 被引量:71
  • 4Trantmann R. Metallwristehaft. Development of several wrought zinc alloys[J].t Metal Industries, 1944, (7) :75-81.
  • 5Anderson, E A. Boyle E J, Ramsey P W. Study on the creep behavior of a new Zn-Ti alloy [J]. Trans. AIME. , 1944, (4) : 156-278.
  • 6Xiaoge Gregory Zhang. Corrosion and Electrochemistry of Zinc [M]. New York: Plenum Press, 1996.
  • 7TAN Bing. Preparation and properties of Zn-Cu-Ti strip [J]. Metallurgy Collections, 1999(2) :37-39.
  • 8LIN Gao-yong, ZHENG Xiao-yan, ZENG Ju-hua. Mierostrueture and properties of extruded profiles of zinc-based alloys [J]. Journal of Central South University (Science and Technology) : 2008,39 (2) : 246 - 250.
  • 9Bos C banden, Schnitger H C, Zhang X, et al. Influence of alloying elements on the corrosion resistance of rolled zinc sheet [J]. Corrosion Science,2006,48(6) 1483-1499.
  • 10Mongeon L, Barnhurst R J. Metallography and Microstructures [M]. Ohio: ASM International Press, 1985.

共引文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部