期刊文献+

再热裂纹敏感性实验研究方法

Methods of Reheat Cracking Susceptibility Study
下载PDF
导出
摘要 总结了再热裂纹敏感性研究中曾使用过的一些实验方法,对实验的原理、过程和结果做了简单介绍,并简要分析了各自的优缺点,指出了再热敏感性实验研究方法的改进方向。 Several experimental methods that have been used in reheat cracking susceptibility study were summarized in this paper. The principle, procedure and results of those tests were simply introduced. Advantages and disadvantages were also mentioned. Tendency and improvement of reheat cracking study test were indicated.
作者 刘俊松
出处 《装备制造技术》 2011年第10期1-3,共3页 Equipment Manufacturing Technology
关键词 再热裂纹 实验 改进 reheat cracking, experimental, improvement
  • 相关文献

参考文献8

  • 1郭寿汾 俞继伦 陶祖潜等.Cr-Ni-Mo-V系钢再热裂缝的研究-再热裂缝敏感性的测试和恒应变应力松弛试验方法的介绍.焊接,:12-18.
  • 2郭寿汾 俞继伦 陶祖潜等.低合金高强度钢消除应力裂缝的研究.焊接学报,(3):35-45.
  • 3A Vinckier & A Dhooge. Reheat Cracking in Welded Structures During Stress Relief Heat Treatments[J]. Heat Treating, 1979, ( 1 ) :72-80.
  • 4《大型球罐用CF钢的应用研究》课题协作组.CF-62钢焊接性试验研究.压力容器,(5):20-26.
  • 5汪辉,郑云龙,卜华全,房务农,张业精,李经涛.12Mn Ni VR钢板焊接裂纹敏感性的试验研究[J].压力容器,2003,20(6):19-23. 被引量:10
  • 6再热裂缝课题协作组.压力容器用钢再热裂缝研究.压力容器,(10):1-14.
  • 7Seth Jason Norton. Development of A Glebe based Test for Post Weld Heat Treatment Cracking in Nickel Alloys[D]. Ohio: Ohio State University, 2002.
  • 8Phung-on Isaratat. An Investigation of Reheat Cracking in the Weld Heat Affected Zone of Type 347 Stainless Steel [D]. Ohio: Ohio State University, 2007.

二级参考文献5

共引文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部