期刊文献+

主循环泵重量和体积的优化设计 被引量:4

Optimization Design of Weight and Volume for Main Circulation Pump
下载PDF
导出
摘要 主循环泵是核动力装置中的重要设备,其重量、尺寸是影响核动力装置整体重量、体积及布置的重要因素。本文采用自主开发的复合形-遗传优化算法,以主循环泵的重量和体积作为优化目标,对主循环泵进行了优化设计。结果显示:优化方案与母型相比重量减小了10.82%,体积减小了4.28%,优化效果显著。同时对主循环泵重量和体积受一回路运行参数以及泵转速影响的敏感性进行了分析,其结果可供工程设计参考。 The main circulation pump is an important component in nuclear power plant,whose weight and volume are the important influence factors on the overall weight,volume and the arrangement of nuclear power plant.The optimization design of the weight and volume for main circulation pump was carried out based on a complex-genetic algorithm,which was a self-developed method.The optimal weight and the optimal volume are 10.82% and 4.28% less than that of the referenced pump,respectively.It can be seen that the optimization effect is obvious.The effects of operation parameters of primary loop and rotating speed of pump on the weight and volume for main circulation pump were also analyzed.Corresponding results can provide reference for engineering design.
出处 《原子能科学技术》 EI CAS CSCD 北大核心 2011年第9期1070-1074,共5页 Atomic Energy Science and Technology
关键词 主循环泵 复合形-遗传优化算法 优化设计 敏感性分析 main circulation pump complex-genetic algorithm optimization design sensitivity analysis
  • 相关文献

参考文献10

  • 1许小平.核反应堆一回路系统参数最优化[D].哈尔滨:哈尔滨船舶工程学院,1987.
  • 2李龙,陈黎明.泵优化设计国内现状及发展趋势[J].水泵技术,2003(2):8-12. 被引量:22
  • 3DERAKHSHAN S, MOHAMMADI B, NOUR BAKHSH A. Efficiency improvement of centrif ugal reverse pumps[J]. Journal of Fluids Engi neering, 2009, 131(2): 1-9.
  • 4PENG Guoyi, CAO Shuliang, ISHIZUKA M, et al. Design optimization of axial flow hydraulic turbine runner: Part Ⅱ. Multi-objective constrained optimization method [J]. International Journal for Numerical Methods in Fluids, 2002, 39: 533-548.
  • 5ZHANG Jinya, ZHU Hongwu, YANG Chun, et al. Multi-objective shape optimization of helicoaxial multiphase pump impeller based on NSGA Ⅱ and ANN[J]. Energy Conversion and Management, 2011, 52(1): 538-546.
  • 6SINGH P, NESTMANN F. An optimization routine on a prediction and selection model for the turbine operation of centrifugal pumps [J]. Experimental Thermal and Fluid Science, 2010, 34: 152-164.
  • 7沈阳水泵设计研究所,中国农业机械化科学研究所.叶片泵设计手册[M].北京:机械工业出版社,1983:162-244,365-378.
  • 8ASME锅炉及受压容器规范(第三篇):核动力装置部件[M].上海化学工业设计院石油化工没备设计建设组,译.上海:国营海峰印刷厂,1974:58.75-78.
  • 9兰州石油机械研究所.石油化工用泵(第五分册):屏蔽泵[M].兰州:兰州石油机械研究所,1977:7,129-131.
  • 10郭科.最优化方法及其应用[M].北京:高等教育出版社,2007.

二级参考文献17

共引文献65

同被引文献26

  • 1王晓明,赵莹,史文祥,管磊.放电等离子体反应器装置及其电场分析评述[J].高压电器,2004,40(4):275-278. 被引量:1
  • 2韩瑞峰.遗传算法原理与应用实例[M].北京:兵器工业出版社,2010:35-146.
  • 3van den BRAEMBUSSCHE R A, BROUCK- AERT J F, PANIAGUA G, et al. Design and optimization of a multistage turbine for helium cooled reaetor[J]. Nuclear Engineering and De sign, 2008, 238(11): 3 136-3 144.
  • 4FITRIYANI D, SU'UD Z, EPUNG S B, et al. Design and safety optimization of ship-based small nuclear power reactors[J]. Progress in Nu- clear Energy, 2008, 50(2 6): 299-303.
  • 5MARSEGUERRA M, ZIO E, PODOFILLINI L. A multiobjective genetic algorithm approach to the optimization of the technical specifications of a nuclear safety system[J]. Reliability Engi- neering and System Safety, 2004, 84(1): 87-99.
  • 6CHAPOT J L C, SILVA F C D, SCHIRRU R. A new approach to the use of genetic algorithms to solve the pressurized water reactor's fuel man agement optimization problem[J]. Annals of Nu clear Energy, 1999, 26(7): 641-655.
  • 7SACCO W F, LAPA C M F, PEREIRA C M N A, et al. A niching genetic algorithm applied to a nuclear power plant auxiliary feedwater system surveillance tests policy optimization[J]. Annals of Nuclear Energy, 2006, 33(9): 753-759.
  • 8沈阳水泵设计研究所,中国农业机械化科学研究所.叶片泵设计手册[M].北京:机械工业出版社,1983:162-244,365-378.
  • 9ASME锅炉及受压容器规范:第3篇:核动力装置部件[M].上海化学工业设计院石油化工设备设计建设组,译.上海:[出版者不详],1974:58,7578.
  • 10朱荣生,管荣国,附强,欧鸣雄,李继忠.核电站冷却水循环泵模型试验[J].排灌机械,2008,26(2):49-52. 被引量:4

引证文献4

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部