期刊文献+

原位增容PA6/POE/EVOH共混物的流变性能研究 被引量:5

Study on Rheological Behavior of In-situ Compatibilized PA6/ POE/EVOH Blends
原文传递
导出
摘要 采用熔融共混法制备了聚酰胺6/乙烯-1-辛烯共聚物/乙烯-乙烯醇共聚物(PA6/POE/EVOH)共混物,利用毛细管流变仪对共混物的流变行为进行了研究。结果表明:PA6/POE/EVOH共混物为假塑性流体,呈现出切力变稀的现象;EVOH的加入增大了PA6/POE/EVOH共混物的表观黏度和黏流活化能,说明共混物对温度的依赖性较强。 The PA6/POE/EVOH blends were prepared by melt blending.The rheological behavior of the blends was studied by capillary rheometer.The results show that PA6/POE/EVOH blends are pseudo plastic fluid and exhibit shear thinning behavior;the apparent viscosity and viscous activation energy of PA6/POE/EVOH blends increase with the addition of EVOH,which prove that the blends are temperature-sensitive.
出处 《塑料科技》 CAS 北大核心 2011年第10期41-43,共3页 Plastics Science and Technology
关键词 聚酰胺6 乙烯-1-辛烯共聚物 乙烯-乙烯醇共聚物 流变性能 PA6 POE EVOH Rheological behavior
  • 相关文献

参考文献6

  • 1王启飞.含有乙烯-乙烯醇共聚物(EVOH)的共混体系(EVOH/PA6,EVOH/HDPE/HDPE-g-MAH)的结构和性能的研究[D].上海:上海交通大学,2006.
  • 2Jen-Taut Yeh, properties of b vinyl alcohol c Wei-Hua Yao, et al. Blending and barrier ends of modified polyamide and ethylene opolymer[J]. Journal of Polymer Science 2005.43:511-521.
  • 3余小红,李迎春,王伟,谢江波.原位增容法制备PA6/EPDM/MMT复合材料流变性能的研究[J].塑料工业,2010,38(7):57-60. 被引量:3
  • 4Wang Q F, Qi R R, Shen Y H, et al. Effect of high-density polyethylene-g-maleic anhydride on the morphology and properties of (high-density polyethylene)/(ethylene-vinyl alcohol) copolymer alloys[J]. J Appl Polym Sci, 2007, 106:3 220-3 226.
  • 5丁正亚,李迎春,王标兵,胡国胜.尼龙11/EVOH共混物的流变性能研究[J].中北大学学报(自然科学版),2008,29(6):546-549. 被引量:4
  • 6刘民英,赵清香,王玉东,杨华,李相魁.PF-Ⅱ尼龙流变行为研究[J].高分子材料科学与工程,1997,13(2):129-131. 被引量:15

二级参考文献11

共引文献17

同被引文献30

  • 1马晓燕,梁国正,曹中林,鹿海军,黄晓军.粘土与弹性体改性聚丙烯复合材料的流变性研究[J].中国塑料,2004,18(6):35-39. 被引量:3
  • 2王启飞,戚嵘嵘,周持兴.聚酰胺6/乙烯-乙烯醇无规共聚物共混体系的相容性及性能研究[J].中国塑料,2005,19(9):35-38. 被引量:8
  • 3淡小翀,杨爱华,樊庆春,张良均,童身毅.固相法化学降解等规聚丙烯[J].合成树脂及塑料,2005,22(6):17-20. 被引量:11
  • 4Chi-Hsien Huang, Jiann-Shing Wu, Chun-chin Huang, et al. Adhesion, permeability, and mechanical properties of multilayered blown films using maleated low-density polyethylene blends as adhesion-promoting layer[J]. Polymer Journal, 2003, 35(12): 978-984.
  • 5Jen-Taut Yen. Blending and barrier properties of blends of modified polyamide and ethylene vinyl alcohol copolymer[J]. Journal of Polymer Science, 2005, 43:511-521.
  • 6Huang Chi-Hsien, Wu Jiann-Shing, Huang Chun-chin, et al. Adhesion, permeability, and mechanical properties of multi- layered blown films using maleated low density polyethy- lene blends as adhesion-promoting laye[J]. Polymer Jour- nas, 2003,35 (12) : 978-984.
  • 7Yen Jen-Taut. Blending and harrier properties of blends of modified polyamide and ethylene vinyl alcohol copolymer [J]. Journal of Polymer Science, 2005,43 .. 511-521.
  • 8Flaris V, Mitchell D. High melt flow, highly - grafted polypropylene [ P]. PCT Int Appl,WO 18463.2002.
  • 9NachtigaU S M B, Baumhardtneto R, Mauler A R S. A factorial design applied to polypropylene functionalization with maleic anhydride [ J ]. Polymer Engineering and Science, 1999, 39 (4) :630 - 637.
  • 10Jiseon Lee, Jin Kwang Kim, Younggon Son. Evaluation of polypropylene grafted with maleicanhydride and styrene as a compatibilizer for polypropylene/clay nanocomposites [ J ]. Polym Bull, 2012, 68:541 -551.

引证文献5

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部