期刊文献+

氮窑脱胶区结构对锰锌铁氧体压坯开裂的影响 被引量:1

Influence of degumming zone structure of nitrogen kiln on crack of Mn-Zn ferrite cores
下载PDF
导出
摘要 在锰锌铁氧体的烧结中,600℃以下的脱胶过程控制直接影响坯体是否开裂。这一过程对于大尺寸坯体开裂程度的影响尤其突出。结合国内常用窑炉的结构,分析了三种不同结构的窑炉脱胶区气流状态、热量传递、温度分布特点及其对压坯脱胶效果的影响,介绍了窑炉内温度梯度的测量方法,并针对三种不同脱胶区结构窑炉提出锰锌软磁铁氧体生产工艺的建议。 During the sintering of Mn-Zn ferrite cores, the process control of degumming below 600℃ has direct influence on the crack of the adobe, especially the large size adobe. In this paper, the characteristics and influence of airstream status, thermal transmission and temperature distribution in the degumming-district on the crack of Mn-Zn ferrite were analyzed for three different kinds of commonly used nitrogen-protected kilns in China. The method for measurement of temperature gradient in the kiln was also introduced, which provides a route to optimize the sintering of the Mn-Zn ferrite cores for the three kinds of kilns.
作者 樊成强
出处 《磁性材料及器件》 CSCD 北大核心 2011年第5期64-69,共6页 Journal of Magnetic Materials and Devices
关键词 锰锌铁氧体 氮窑 烧结 脱膜 开裂 Mn-Zn ferrite nitrogen-protected kiln sintering degumming crack
  • 相关文献

参考文献3

  • 1都有为.铁氧体[M].南京:江苏科技出版社,2000..
  • 2阳开新.软磁铁氧体制作技术[z].四川绵阳:工信部磁性材料及器件专业情报网,中国电子科技集团公司九所信息中心,2009.284-285.
  • 3王茹,王琪,李莉,敖宁建,华正坤.改性聚乙烯醇的热性能[J].塑料工业,2002,30(1):32-34. 被引量:49

二级参考文献1

共引文献53

同被引文献2

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部