摘要
目前优质钢的楔横轧加工方面的研究已经成熟,但铝合金的楔横轧研究很少。使用韧性破坏准则对楔横轧铝合金的内部损伤进行了研究,得到了各个工艺参数对轧件内部损伤的影响规律:最大损伤量随加工温度的升高而下降;随轧辊转速的升高而升高;随模具的展宽角、成形角、断面收缩率的增大而减小。结论对实际生产具有一定的指导意义。
At present it is familiar with high-quality steel on cross wedge rolling,but the study for aluminum alloy on cross wedge rolling is rarely.By using ductile failure criterion,the internal damage of a-luminum alloy on cross wedge rolling was studied and the impact of various process parameters upon the internal damage was obtained as following ：The max internal damage shall decrease with increasing of pro-cessing temperature and increasing of forming angle,stretching angle,reduction of area;but increase with the increasing of roll speed.These results have certain guiding significance for the practical production.
出处
《机械设计与制造》
北大核心
2011年第9期101-103,共3页
Machinery Design & Manufacture
关键词
楔横轧
铝合金
内部损伤
Cross wedge rolling
Aluminum alloy
Internal damage
