期刊文献+

海因环氧树脂/DDS体系的制备与性能 被引量:4

Preparation and Curing Kinetics of Hydantoin Epoxy/DDS System
下载PDF
导出
摘要 合成了海因环氧树脂,采用红外光谱和核磁共振进行了表征,制备了海因环氧树脂/二氨基二苯砜(DDS)体系,研究了海因环氧树脂/DDS体系的固化反应特性及固化物的性能。结果表明,树脂体系在100℃~296℃有一放热峰,峰值温度为197℃,140℃的凝胶时间长于42 min,在180℃下仅8 min;树脂浇铸体的氧指数为26.6,弯曲强度为111MPa,弯曲模量为4.14 GPa,冲击强度为14.8 kJ/m2。 We have synthesized hydantoin epoxy resin and hydantoin epoxy/dia minophenyl sulfon(DDS) system.Hydantoin epoxy resin was substantiated by FT-IR and 1H-NMR spectrum.Non-isothermal differential scanning calorimetry(DSC) was examined to follow the curing process.The analyses show that there is an exothermic reaction peak from 100 ℃ to 307 ℃ for the hydantoin epoxy/DDS system and top of the peak is 197 ℃,which confirms main reaction of hydantoin epoxy/DDS system.Curing characteristicness of hydantoin epoxy resin is the similar with that of diglycidyl ether of bisphenol A and cycloaliphatic epoxy resin(TDE-85).The hydantoin epoxy/DDS cured system was made and its properties were studied.Investigations show that mechanical properties and the heat resistance of hydantoin epoxy resin have the same with of diglycidyl ether of bisphenol A,flame-retardant characteristicness of hydantoin epoxy resin is good than of diglycidyl ether of bisphenol A,the flexural strength is 111MPa,flexural modul is 4.14 GPa,impact strength is 14.8 kJ/m2,Tg is 142 ℃,and limit oxygen index is 26.6,so hydantoin epoxy resin can become matrix for performance composite material manufacture and adhesive application in automobile industries,shipbuilding,aerospace and laminates.
作者 李玲 田晋丽
出处 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2011年第9期161-163,167,共4页 Polymer Materials Science & Engineering
基金 山西省攻关项目资助(20100321082-01)
关键词 海因环氧树脂 合成 氧指数 hydantoin epoxy resin synthesis limit oxygen index
  • 相关文献

参考文献8

  • 1徐伟箭,周晓,夏新年.新型含氮阻燃环氧树脂的合成与性能[J].湖南大学学报(自然科学版),2006,33(4):72-75. 被引量:25
  • 2Liu W B, Qiu Q H, Wang J, et al. Curing kinetics and properties of epoxy resin-fluorenyl dia mine systems [J]. Polymer, 2008, (49):4399-4405.
  • 3Mercado L A, Galia M, Reina J A. Sil-ieon-containing flame retardant epoxy resins: synthesis, characterization and properties[J]. Polym. Degrad. Stab., 2006, (91): 2588-2594.
  • 4Hergenrother P M, Thompson C M, Smith Jr J G. Flame retardant aircraft epoxy resins containing phosphorus [J ]. Polymer, 2005, (46) : 5012-5024.
  • 5Liu R, Wang X D. Synthesis, characterization, thermal properties and flame retardaney of a novel nonflamable phosphazene-based epoxy resin[J]. Polym. Degrad. Stab., 2009, 94: 617-624.
  • 6马承银.水溶性海因环氧树脂合成方法:中国,101307131A[P].2008-11-19.
  • 7乌云其其格.多官能环氧/DDS体系性能研究[J].工程塑料应用,2002,30(4):8-10. 被引量:2
  • 8郑亚萍,宁荣昌,狄西岩,李柏松.TDE-85/DDS固化体系性能研究[J].玻璃钢/复合材料,1999(6):9-12. 被引量:8

二级参考文献16

  • 1方雷,石光,李国明.环氧树脂的阻燃性研究进展[J].化工新型材料,2005,33(7):53-55. 被引量:17
  • 2陈正钧.耐蚀非金属材料及其应用[M].化学工业出版社,1990..
  • 3孙曼灵.高分子材料[M].西安:西北工业大学出版社,1986..
  • 4刘振海,热分析导论,1991年
  • 5高家武,高分子材料热分析曲线集,1990年
  • 6陈正钧,耐蚀非金属材料及其应用,1990年
  • 7PAUL M,HERGENROTHER C M,THOMPSON J G,et al.Flame retardant aircraft epoxy resin containing phosphorus[J].Polymer,2005,46(14):5012-5024.
  • 8黄沧闵.新型双官能环氧树脂之合成与特性探讨[D].台湾:国立成功大学,2001.
  • 9KREVELEN D W.Some basic Aspects of flame resistance polymeric materials[J].Polymer,1975,16:615-620.
  • 10隗明,宁荣昌.深潜壳体用高模量树脂基体的研究[J].塑料工业,1997,25(3):91-93. 被引量:9

共引文献32

同被引文献28

引证文献4

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部