摘要
提出了一种反向散射链路频率生成电路,用于符合EPCTM Class1 Generation2协议的无源超高频射频识别(UHF RFID)芯片.该电路在读写器发送Query命令时生成控制信号,使积分器产生参考电压,控制弛张振荡器产生符合协议要求的反向散射链路频率.该电路采用TSMC0.18μm CMOS工艺实现.测试结果表明,在1V工作电压下功耗为0.52μW.采用该电路的UHFRFID芯片可以提高芯片工作距离以及读取速率.
A novel backscatter link frequency (BLF) generator for UHF RFID transponders which meet the EPCTM Classl Generation2 protocol is presented. A control signal is generated when the reader sends the Query command. Then this signal controls an integrator generating a reference voltage which makes a relaxation oscillator output a BLF. This BLF can meet the requirements of the Gen2 protocol. The BLF generator is implemented by the TSMC 0. 18 μm CMOS process. At the end of this paper, measuremental results show that the circuit power consumption is 0. 52 μW at the 1 V operating voltage. As a result, the tag with the proposed circuit can acquire a longer read range and higher read rates.
出处
《西安电子科技大学学报》
EI
CAS
CSCD
北大核心
2011年第5期152-158,164,共8页
Journal of Xidian University