期刊文献+

Broadband non-polarizing beam splitter based on guided mode resonance effect

Broadband non-polarizing beam splitter based on guided mode resonance effect
下载PDF
导出
摘要 A broadband non-polarizing beam splitter (NPBS) operating in the telecommunication C+L band is designed by using the guided mode resonance effect of periodic silicon-on-insulator (SOI) elements. It is shown that this double layer SOI structure can provide ~50/50 beam ratio with the maximum divergences between reflection and transmission being less than 8% over the spectrum of 1.4μm-l.7 μm and i% in the telecommunication band for both TE and TM polarizations. The physical basis of this broadband non-polarizing property is on the simultaneous excitation of the TE and TM strong modulation waveguide modes near the designed spectrum band. Meanwhile, the electric field distributions for both TE and TM polarizations verify the resonant origin of spectrum in the periodic SOI structure. Furthermore, it is demonstrated with our calculations that the beam splitter proposed here is tolerant to the deviations of incident angle and structure parameters, which make it very easy to be fabricated with current IC technology. A broadband non-polarizing beam splitter (NPBS) operating in the telecommunication C+L band is designed by using the guided mode resonance effect of periodic silicon-on-insulator (SOI) elements. It is shown that this double layer SOI structure can provide ~50/50 beam ratio with the maximum divergences between reflection and transmission being less than 8% over the spectrum of 1.4μm-l.7 μm and i% in the telecommunication band for both TE and TM polarizations. The physical basis of this broadband non-polarizing property is on the simultaneous excitation of the TE and TM strong modulation waveguide modes near the designed spectrum band. Meanwhile, the electric field distributions for both TE and TM polarizations verify the resonant origin of spectrum in the periodic SOI structure. Furthermore, it is demonstrated with our calculations that the beam splitter proposed here is tolerant to the deviations of incident angle and structure parameters, which make it very easy to be fabricated with current IC technology.
出处 《Chinese Physics B》 SCIE EI CAS CSCD 2011年第10期272-276,共5页 中国物理B(英文版)
基金 supported by the Youth Science Research Foundation of China University of Mining and Technology (Grant No. 2009A058) the Natural Science Foundation of Shanghai Committee of Science and Technology (Grant No. 10ZR1433500)
关键词 non-polarizing beam splitter guided mode resonance SILICON-ON-INSULATOR rigorouscoupled-wave analysis non-polarizing beam splitter, guided mode resonance, silicon-on-insulator, rigorouscoupled-wave analysis
  • 相关文献

参考文献21

  • 1Magnusson R and Wang S S 1992 Appl. Phys. Lett. 61 1022.
  • 2Wang S S and Magnusson R 1994 Opt. Lett. 19 919.
  • 3Sharon A, Rosenblatt D and Friesem A A 1997 J. Opt. Soc. Am. A 14 2985.
  • 4Sharon A, Rosenblatt D and Friesem A A 1996 Opt. Lett. 21 1564.
  • 5Thurman S T and Morris G M 2003 Appl. Opt. 42 3225.
  • 6Sentenac A and Fehrembach A L 2005 J. Opt. Soc. Am. A 22 475.
  • 7Priambodo P S, Maldonado T A and Magnusson R 2003 Appl. Phys. Lett. 83 3248.
  • 8Magnusson R, Shin D and Liu Z S 1998 Opt. Lett. 23 612.
  • 9Ganesh N, Xiang A, Beltran N B, Dobbs D W and Cun- ningham B T 2007 Appl. Phys. Lett. 90 081103.
  • 10Wang Z, Sang T, Zhu J, Wang L, Wu Y and Chen L 2006 Appl. Phys. Lett. 89 241119.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部