期刊文献+

45圆钢热顶锻裂纹原因分析 被引量:7

Analysis on the Crack of 45 Round Steel of Xuanhua Steel During Hot Forging
原文传递
导出
摘要 针对45圆钢热顶锻开裂问题,从宏观和微观两方面对裂纹原因进行分析,结果表明圆钢折叠缺陷是引起热顶锻裂纹的主要原因,同时局部脱碳加剧了顶锻开裂。可以通过严格执行检修和轧制制度,同时配合优化轧钢加热制度来消除热顶锻裂纹的发生。 By analyzing crack samples of hot forging for 45 round steel from both macro and micro, it can be found that the crack was mainly caused by folding, and local surface decarburization of round steel sharpened the crack of hot forging. By implementing regulations on overhaul and rolling strictly, and optimizing heating institution, the crack of hot forging could be prevented.
出处 《物理测试》 CAS 2011年第5期33-35,共3页 Physics Examination and Testing
关键词 45圆钢 热顶锻 折叠 45 round steel hot forging folding
  • 相关文献

参考文献3

  • 1吕炎.锻件缺陷分析与对策[M].北京:机械工业出版社,1983.
  • 2孔祥涛,包燕平,孙彦辉,等.影响中、小型转炉45圆钢热顶锻合格率的冶金因素分析[C]//2005年中国钢铁年会论文集.北京:中国金属学会,2005:209.
  • 3安诚庆,张希元,张宏.冷镦钢顶锻开裂原因分析及其改进措施[J].轧钢,2003,20(1):66-67. 被引量:18

共引文献17

同被引文献42

引证文献7

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部