期刊文献+

应对闭式非驱动液压系统冲击负载的解决方案

Solution for Closed Circuit Non-Propel Hydraulic Systems Subject to Shock Loading
下载PDF
导出
摘要 本文从系统弹性模量着手研究了闭式非驱动系统在遭受冲击负载时,系统冲击产生的原因及其解决方案。采取在回路中添加蓄能器的方法来防止系统低压侧压力下降。实验证明添加蓄能器后系统低压侧压力稳定。 Reasons and Solutions for shock loading in closed circuit non-propel hydraulic systems are studied. An accumulator is installed in the circuit to keep the low loop pressure It is demonstrated that accumulator can effectively prevent the pressure drop.
作者 林海斌
出处 《液压气动与密封》 2011年第10期59-61,共3页 Hydraulics Pneumatics & Seals
关键词 闭式非驱动 弹性模量 冲击 蓄能器 closed circuit non-propel bulk modulus shock loading accumulator
  • 相关文献

参考文献6

  • 1Sauer-Danfoss System Application engineer. Closed Circuit non-nropel hydraulic systems subject to shock loading. Sauer-Danfoss, 2006:1-10.
  • 2ALI VOLKAN AKKAYA. Effect of bulk modulus on performance of a hydrostatic transmission control system [J]. SADHANA, 2006:1-14.
  • 3Yu J, Chen Z, Lu Y. The variation of oil effective bulk modulus with pressure in hydraulic systems [J]. Trans. ASME: J. Dyn. Syst. Meas. Control 1994(116): 146- 150.
  • 4Manring N D. The effective fluid bulk modulus within a hydrostatic transmission. Trans. ASME: J. Dyn. Syst. Meas. Control 1997(119): 462-466.
  • 5Sauer-Danfoss System Application engineer. Shredder and Mulcher Propel Subsystem. Sauer-Danfoss, 2011.
  • 6吴晓明,高荣殿,王益群.蓄能器工作参数的选择[J].液压与气动,1996,20(1):9-11. 被引量:5

共引文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部