期刊文献+

地下汽车库防排烟若干问题探讨 被引量:4

Discussion on underground garage smoke control
下载PDF
导出
摘要 实际工作中遇到的有关地下汽车库防排烟问题,对现行GB 50067《汽车库、修车库、停车场设计防火规范》有关条文进行探讨,提出了在面积不超过2 000 m2的地下汽车库设计时应增设排烟设施,地下汽车库汽车坡道不设防火卷帘、水幕的条件,以及地下汽车库机械排烟系统与机械排风系统合用时,其排烟口和排风口应分开设置的建议。 Through the problems on underground garage smoke control met in the practical work,relevant provisions of GB 50067 "Fire Protection Code of Design of Garage,Repair Garage and Parking Lot" were discussed.Additional smoke control facilities should be designed in the underground garage with the area no more than 2 000 m2.conditions of underground garage ramp without the fire roller shutter and water curtain were proposed,and smoke exhaust port and ventilation should be set separately was suggested when underground garage mechanical smoke exhaust system in combination with the mechanical ventilation system.
出处 《消防科学与技术》 CAS 北大核心 2011年第10期908-910,共3页 Fire Science and Technology
关键词 地下汽车库 防排烟 防烟分区 补风 underground garage smoke control smoke division makeup air
  • 相关文献

参考文献7

二级参考文献12

  • 1阎绪明,任彧君,周亚娟.诱导风机系统解决地下车库通风排烟问题的探讨[J].长春工程学院学报(自然科学版),2004,5(2):16-18. 被引量:3
  • 2卢平,丛北华,廖光煊,范维澄,厉培德.纵向通风水平隧道火灾烟气流动特性研究[J].中国工程科学,2004,6(10):59-64. 被引量:35
  • 3胡隆华,霍然,王浩波,杨瑞新.公路隧道内火灾烟气温度及层化高度分布特征试验[J].中国公路学报,2006,19(6):79-82. 被引量:35
  • 4GB50067-97.汽车库、修车库、停车场设计防火规范[S].[S].,..
  • 5GB50098-98.人民防空工程设计防火规范[S].[S].,..
  • 6GB50045-95(2005年版),高层民用建筑设计防火规范[S].
  • 7GB 50016-2006,建筑设计防火规范[S].
  • 8P H E,Leur,V D. Numerical study of the stratified smoke flow in a Corridor : full scale calculations[J]. Fire Safety Journal, 1989,14 : 287-302.
  • 9Yin,R ,and Chow W K. Building fire simulation with a field model based on large eddy simulation [J].Architectural Science Review, 2002,45 (2) : 145- 153.
  • 10McGrattan,K B , Rehm R G and Forney G P ,et al. Fire dynamics simulator-technical reference guide [M] . NISIR 6467, National Institute of Standards and Technology, Gaithersburg, Maryland, USA, 2000.

共引文献1402

同被引文献9

引证文献4

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部