期刊文献+

聚氯乙烯/木质素共混物的热稳定性 被引量:6

Thermal Stability of Poly(vinyl chloride)/Lignin Blends
下载PDF
导出
摘要 采用热重分析法研究了聚氯乙烯(PVC)/木质素共混物的热稳定性。结果表明,共混物的热稳定性取决于2个相反效应的叠加效果:一是木质素分子中的受阻酚类结构单元具有捕捉热降解中形成的自由基的功能,因此可以改善共混物的热稳定性;二是木质素在150~250℃的温度区间内会发生轻微的脱水现象,水分对PVC的自催化脱氯化氢过程具有促进作用,因此会降低PVC的热稳定性。在热分解初期,后者起主要作用,共混物的早期热稳定性有所降低;但当木质素在更高温度下完成脱水后,前者变成主要作用,共混物的中期热稳定性有明显提升。 Thermal stability of poly (vinyl chloride) (PVC)/lignin blends was studied with thermogravimetric analysis. It was shown that the thermal stability depended on the integration of two behaviors, sterically hindered phenol structure of lignin could improve thermal stability of the blends; dehydration of lignin could decrease thermal stability of the blends. In the early stage of the decomposition, the latter was dominant, and the early thermal stability of the blends was worse than that of PVC. In the medium-term of the decomposition, thermal stability of the blends was better than that of PVC due to the end of dehydration, and the former turned to predomination in this stage.
出处 《中国塑料》 CAS CSCD 北大核心 2011年第10期59-63,共5页 China Plastics
关键词 聚氯乙烯 木质素 共混 热稳定性 poly(vinyl chloride) lignin blending thermal stability
  • 相关文献

参考文献19

  • 1Baileya S E, Olinb T J, Brickab R M, et al. A Review of Potentially Low-cost Sorbents for Heavy Metals[J]. Wa ter Research, 1999, 33 : 2469-2479.
  • 2Reale S, Tullio D A, Spreti N, et al. Mass Spectrometry in the Biosynthetic and Structural Investigation of Lignins [J]. Mass Spectrom Rev, 2004, 23:87-126.
  • 3衣守志,石淑兰,李翠珍.制浆废液中木质素的分离与利用新进展[J].国际造纸,2001,20(6):56-58. 被引量:29
  • 4Ushmarin N F, Koltsov N I. Lignin as a Filler for Rubber Mixes in Footwear Production[J]. Polym Recycl, 2000, 5 : 235-239.
  • 5Setua D K, Shukla M K, Vineeta N, et al. Lignin Rein- forced Rubber Composites[J]. Polym Compos, 2000, 21: 988-995.
  • 6Sarkar S, Adhikari B. Thermal Stability of Lignin Hy- droxy Terminated Polybutadiene Copolyurethanes [ J ]. Polym Degrad Stab, 2001, 73:169-175.
  • 7Zhao B, Chen G, Liu Y, et al. Synthesis of Lignin Based Epoxy Resin and Its Characterization [J]. J Mater Sci Lett, 2001, 20:859-862.
  • 8Sarkar S, Adhikari B. Lignin-modified Phenolic Resin.. Synthesis Optimization, Adhesive Strength, and Thermal Stability[J]. J Adhes Sci Technol, 2000, 14 : 1179-1193.
  • 9Feldman D, Banu D, Campanelli J, et al. Blends of Viny- lie Copolymer with Plasticized Lignin: Thermal and Me- chanical Properties[J]. J Appl Polym Sci, 2001, 81 : 861-874.
  • 10Feldman D, Banu D. Contribution to the Study of Rigid PVC Polyblends with Different Lignins [J]. J Appl Polym Sci, 1997, 66:1731-1744.

二级参考文献27

  • 1潘学军,谢来苏,隆言泉.氨基酸型木素鳌合树脂的制备[J].纤维素科学与技术,1995,3(3):25-31. 被引量:4
  • 2蒋杏芬,邰瓞生,李忠正.木质素磺酸盐潜在应用[J].纤维素科学与技术,1996,4(2):31-36. 被引量:5
  • 3中野准三(日),高洁译.木质素化学:基础与应用.北京:轻工业出版社,1988,46-53
  • 4Simionescu C I, Rusan Viorica, Macoveanu Mihaela M et al. Lignin/epoxy composites. Composites Science and Technology, 1993, 48:317 ~323
  • 5Funaoka, Masamitsu. New type of phenolic; lignin - based network polymer with the structure- variable function composed of l, 1 -diarylpropane units. Polym. Int, 1998, 47 (3): 277~290
  • 6Sarkar, Sanjay. Lignin - modified phenolic resin: Synthesis optimization, adhesive strength, and thermal stability. J. Adhes. Sci. Technol., 2000,14(9): 1179~1193
  • 7ThringRW.用溶剂木素制备聚氨基甲酸乙酯[J].Biomass Bio-energy,1997,13(3):125-132.
  • 8Dizhbite T, Lignin - a useful bio - resource for the production of sorption - active materrials. Bio - resource Technol., 1999, 67 (3): 221~228
  • 9Saitod. Development of New Lignin Derivatives as Soil - conditioning. Jap Wood Res Soc., 1997, 43 (8): 669~677
  • 10Lalvani. Chromium adsorption by Lignin. Energy Source, 2000, 22(1):45 ~56

共引文献28

同被引文献105

引证文献6

二级引证文献32

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部