摘要
房建工程主体阶段需要大量模板,近阶段模板系统基本采用加工木板及方木,但木板及方木损耗量大,而且废旧小块模板、短方木重复利用率低,如采用拼接技术,对小块模板拼接、短木方进行接长,并保证其一定的强度和刚度,就可重复用于工程,并起到大大提高模板、方木的利用率,降低模板成本投入和节能增效的作用。
A great deal of form will be needed during the building structure construction. The processing wood board and square timber is manly used in the form system recently, but wood board and square timber wear down large, the small form and shorter timber can't be reused, if the splice technology was used, then the small form can be spliced, the shorter square timber can be connected, and thier strength and rigidity can be guaranteed, and they can be reused in the project, and to improve the efficiency of the form and the square timber, reduce the cost of form, save energy.
出处
《工程质量》
2011年第10期58-61,共4页
Construction Quality
关键词
木板
方木
拼接
重复利用
节能增效
wood board
square timber
splice
reuse
save energy and improve the efficiency