摘要
新建铜冶炼厂配套检化验系统应与工厂主体主工程同时设计、施工。本文主要论述了大型铜冶炼厂建厂时检化验系统在管理模式、整体配置及水、电、通风和安全卫生等方面设计应考虑并注意的事项,并就现阶段化验室普遍存在的问题提出自己的建议及看法。
The test system for the large new copper smelter should be designed and constructed at the same time with the plant's main project.The paper discusses the important design issues of test system for large copper smelter,including management mode,integral deployment,water power supply,ventilation,safety and sanitation etc.It also puts forward the recommendations and points of the view for the problems of existing analysis laboratory.
出处
《铜业工程》
CAS
2011年第5期89-92,共4页
Copper Engineering
关键词
化验室
配置
通风
分析仪器
管理模式
试样制备
analysis laboratory
ventilation
analysis instrument
management mode
sample preparation