期刊文献+

Gigacycle fatigue behaviors of two SNCM439 steels with different tensile strengthes 被引量:1

Gigacycle fatigue behaviors of two SNCM439 steels with different tensile strengthes
下载PDF
导出
摘要 Gigacycle fatigue behaviors of two SNCM439 steels with different tensile strengthes were experimentally studied by rotating bending tests,to investigate the effects of the tensile strength obtained by different heat treatment processes on very high cycle fatigue failure mechanisms.The material with higher tensile strength of 1 710 MPa exhibited typical gigacycle fatigue failure characteristics,whereas one with lower tensile strength of 1 010 MPa showed only traditional fatigue limit during the tests and no gigacycle failure could be found even when the specimen ran up to more than 10 8 cycles.Metallographic and fractographic analysis were carried out by an optical microscope (OM) and scanning electron microscope (SEM).It showed two different crack initiation mechanisms that for the specimen with lower tensile strength the crack prefers surface initiation and for that with higher strength the crack initiates from subsurface inclusions revealed by a fish-eye like microstructure. Gigacycle fatigue behaviors of two SNCM439 steels with different tensile strengthes were experimentally studied by rotating bending tests,to investigate the effects of the tensile strength obtained by different heat treatment processes on very high cycle fatigue failure mechanisms.The material with higher tensile strength of 1 710 MPa exhibited typical gigacycle fatigue failure characteristics,whereas one with lower tensile strength of 1 010 MPa showed only traditional fatigue limit during the tests and no gigacycle failure could be found even when the specimen ran up to more than 10 8 cycles.Metallographic and fractographic analysis were carried out by an optical microscope (OM) and scanning electron microscope (SEM).It showed two different crack initiation mechanisms that for the specimen with lower tensile strength the crack prefers surface initiation and for that with higher strength the crack initiates from subsurface inclusions revealed by a fish-eye like microstructure.
出处 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2011年第5期778-784,共7页 力学学报(英文版)
基金 supported by funds of MHI Corporation,the National Natural Science Foundation of China (10872105)
关键词 Gigacycle fatigue · S-N curves · Crack initiation · Fractography Gigacycle fatigue · S-N curves · Crack initiation · Fractography
  • 相关文献

参考文献1

二级参考文献2

共引文献36

同被引文献4

引证文献1

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部