摘要
孔位的设计及标准化是减少调机次数和调机时间的关键因素,将系统孔和结构孔同时定位在32mm系统的网格上并使其部分孔位前后对称、部分孔位上下对称,以实现左右板件孔位的互换,从而减少调机次数。
The design and standardization of hole positions are key factors to reduce machine adjustment frequency and time.The system holes and structural holes should be positioned on the grid of a 32mm system simultaneously,with some hole positions adjusted in the symmetrical fore-and-aft direction and some hole positions adjusted up and down symmetrically,to realize the interchangeable hole positions on the left and right boards,therefore reducing machine adjustment frequency.
出处
《林业机械与木工设备》
2011年第11期25-27,共3页
Forestry Machinery & Woodworking Equipment
关键词
调机时间
32mm系统
标准化
machine adjustment time
32mm system
standardization
