期刊文献+

热镀Galfan合金界面层的生长动力学研究 被引量:5

Kinetics of interfacial layer during hot-dip Galfan alloy
下载PDF
导出
摘要 通过还原法制备不同浸镀时间的Galfan合金镀层样品,用SEM观察镀层的微观形貌,根据扫描图片测量界面层的厚度,拟合界面层厚度与时间的函数关系.实验结果表明,随着浸镀时间的延长,镀层的共晶组织越来越致密和均匀,界面层的厚度有增长的趋势.最后得出了界面层生长过程中形核阶段动力学方程和长大阶段的动力学方程. Hot-dip Galfan alloy coating at different exposure times were prepared by reduction. SEM was used to observe themicrostructureofGalfancoating. The thickness ofthe interfacial layer was measured according to scan images. Based on the results, the growth relations of the intermetallic layer at different exposure times were obtained by curve-fitting method. The results show that Galfan coating is denser and more uniform with increasing time. The formation ofinterfacial layer is divided into nucleation and growth. Finally, the dynamic equations of interracial layer growth are calculated during the nucleation stage and growth stage.
出处 《河北工业大学学报》 CAS 北大核心 2011年第5期70-73,77,共5页 Journal of Hebei University of Technology
基金 河北省科技支撑项目(08275605D)
关键词 GALFAN合金 界面层 共晶组织 动力学 热浸镀 Galfan alloy interracial layer eutectic structure kinetics dipping
  • 相关文献

参考文献14

  • 1高秋志.森吉米尔热浸镀Galfan合金工艺及组织结构的研究[M].天津:河北工业大学,2009.
  • 2Caceres P G, Hotham C A, Spittle J A, et al. Mechanisms of for mation and growth ofinter-metaUic layers during hot dipping of iron in Zn-3A1 and Zn-6Albaths [J]. MaterSci Technol, 1986, 2: 871.
  • 3Ghuman A R P, Goldstein J I. Research mechanisms for the coatings formed during hot dipping of iron in 0 to 10 Pct AI-Zn baths at 450-700℃ [J]. MetTrans, 1971, 2A: 2903.
  • 4Chen L, Fourmentin R, Mcdermid J R. Morphology and kinetics ofinterfacial layer formation during continuous hot-dip Galvanizing and Galvannealing [J]. The Minerals, Metals & Materials Society and ASM International, 2008, 39: 2128-2142.
  • 5杜鹏翔.钢板热浸镀铝锌合金镀层的形成过程及其结构分析[J].材料保护,2001,34(11):14-15. 被引量:10
  • 6Mandal G K, Balasubramaniam R, Mehrotra SP. Theoretical investigation of the interracial reaction during hot-dip Galvanizing of steel [J]. The Minerals, Metals & Materials Society and ASM International, 2009, 40A: 637-645.
  • 7黄跃进.Zn-5%Al-RE合金镀层钢丝的形貌和耐腐蚀分析[J].热处理,2003,18(4):28-31. 被引量:10
  • 8李大东,刘锦燕,陈文龙.使用温度对镀铝锌合金镀层微观结构的影响[J].钢铁钒钛,2008,29(2):60-66. 被引量:3
  • 9冯彬.热浸镀Galfan合金镀层开裂机理的研究[M].天津:河北工业大学,2008.
  • 10MonojitDuttaa, ShivBratSingh. Effect of Strip Temperature on the Formation of an Fe2Al5 Inhibition Layerduring Hot-Dip Galvanizing [J]. Scripta Materialia, 2009, 60: 643-646.

二级参考文献29

  • 1郭太雄,方淑芳,娄燕.热镀铝锌合金镀层板生产及应用[J].中国涂装,2004(3):32-34. 被引量:11
  • 2邸柏林.论钢铁的铝锌合金热浸镀层[J].表面技术,1994,23(1):1-5. 被引量:19
  • 3陈锦虹,李扬宗,卢锦堂,赵峥嵘,刘川.热镀锌铝稀土及锌镍合金镀层性能的研究[J].稀有金属材料与工程,1989,18(6):20-24. 被引量:7
  • 4夏原,姚枚,张瑞平.A_3钢热浸铝镀层生长规律的影响因素[J].中国有色金属学报,1996,6(1):74-78. 被引量:19
  • 5孟荣祥 杨熙珍.热浸镀55%Al-Zn合金过程中化合物层生长动力学分析[J].中国腐蚀与防护学报,1987,7(1):8-17.
  • 6韦永德 刘志儒 等.用化学法对20钢、纯铁表面扩渗稀土元素的研究[J].金属学报,1983,19(5):197-200.
  • 7孟荣祥 杨熙珍 等.热浸镀55%Al-Zn过程中化合物层生长动力学分析[J].中国腐蚀与防护学报,1987,7(1):8-17.
  • 8李华飞.钢材热浸镀55%Al-Zn合金工艺及其性能的研究:博士学位论文[M].武汉:华中科技大学材料科学与工程学院,2001..
  • 9蒙多尔福 L F 王祝堂 等.铝合金的组织与性能[M].北京:冶金工业出版社,1988..
  • 10肖纪美.合金热力学(下册)[M].北京:冶金工业出版社,1984..

共引文献27

同被引文献36

引证文献5

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部