期刊文献+

SLD对SAC-OCDMA系统性能的影响分析

Effects of SLD on the Performance of SAC-OCDMA System
下载PDF
导出
摘要 首先介绍了光正交码(OOC)的构造方法,以及光谱幅度编码光码分多址(SAC-OCDMA)系统的实现原理。通过分析超辐射发光二极管(SLD)光源的功率谱不平坦对系统信干比和误码性能的影响,给出了OOC选码方案与光源光谱特性的关系;在此基础上,通过对接收信号进行不同的权重处理,达到改善信干比的效果。仿真结果显示,该方法在更多用户同时上路时能够提高信干比、改善通信质量,为系统的可实现提供了一种简便方法。 The constructions of optical orthogonal code(OOC) and realizing principles of SAC-OCDMA system are introduced.Then the effects of the unsmooth power spectrum of the superradiance light emitting diode(SLD) light source on the performance of SAC-OCDMA system are analyzed.And the relationship between code-choosing rules and the spectrum bound of light source is given.Based on which,different weight factors are handled on received signals to improve the signal-to-interference ratio(SIR).Simulation results show that this method can effectively increase SIR and the communication quality when simultaneous subscribers exist,offering a simple method for the realization of SAC-OCDMA system.
作者 杨祎 张晓燕
出处 《半导体光电》 CAS CSCD 北大核心 2011年第5期680-683,688,共5页 Semiconductor Optoelectronics
基金 陕西省教育厅专项科研计划项目(2010JK839)
关键词 超辐射发光二极管 光正交码 光码分多址 多址干扰 信干比 superluminescent diodes OOC OCDMA MAI signal-to-interference ratio
  • 相关文献

参考文献9

  • 1李传起,周谞,朱迎春,孙婷婷,赵立龙,宋标.光纤光栅阵列编解码器反射谱性能研究[J].光学学报,2009,29(12):3277-3281. 被引量:5
  • 2Yoshima S,Nakagawa N, Kataoka N, et al. 10 Gb/s- based PON over OCDMA uplink burst transmission using SSFBG encoder/multi-port decoder and burst- mode receiver[J]. J. of Lightwave Technol. ,2010, 28 (4) :365-371.
  • 3Shastri B J, Plant David V. 5/10-Gb/s burst- mode clock and data recovery based on semiblind oversampling for PONs: theoretical and experimental [J].IEEE J. of Sel. Top. in Quantum Electron., 2010,16(5) : 1298-1320.
  • 4Ghazisaeidi A, Rusch L A. Capacity of SOA-assisted SAC--OCDMA[J]. IEEE Photon. Technol. Lett., 2010,22(7) : 441-443.
  • 5Noshad M, Jamshidi K. Code family for modified spectral-amplitude-coding OCDMA systems and performance analysis[J].J. Opt. Commun. Net.,2010,2(6):344-354.
  • 6Fouli K. Native multicasting in a 2D-OCDMA PON [J]. IEEE Commun. Lett. ,2008,12(9) :696-698.
  • 7韩笑,张兴周,朱武增.基于平衡检测法的光谱幅度编码系统的设计与仿真[J].应用科技,2010,37(1):5-7. 被引量:2
  • 8Pawar S S, Shevgaonkar R K, Karandikar A. Improved SAC-OCDMA system with multiple incoherent sources[J]. IEEE Photon. Technol. Lett. ,2008,20(24):2099-2101.
  • 9周秀丽,胡渝.基于MQC的谱幅编码OCDMA系统研究[J].光电子.激光,2005,16(6):702-705. 被引量:10

二级参考文献25

  • 1付晓梅,于晋龙,李恩邦,朱德鹏,李亚男,戴居丰,杨恩泽.利用布拉格光栅阵列实现二维光码分多址的研究[J].光学学报,2004,24(7):961-964. 被引量:12
  • 2周秀丽,谭庆贵,蔡然,胡渝.星间无线OCDMA系统单用户检测容量研究[J].光电子.激光,2005,16(1):49-52. 被引量:4
  • 3吉建华,徐铭,杨淑雯,张志朋.2.5 Gbit/s码位重叠快跳频光码分多址实验系统[J].中国激光,2006,33(6):779-782. 被引量:11
  • 4P. Niewczas, A. J. Willshire, L. D. Ziuda et al.. Performance analysis of the fiber Bragg grating interrogation system based on an arrayed waveguide grating [J]. IEEE T. Instrum. Meas. , 2004, 53(4) : 1192-1196.
  • 5K. Yum, J. Shin, N. Park. Wavelength-time spreading optical CDMA system using wavelength multiplexers and mirrors fiber delay lines[J]. IEEE Photon. Technol. Lett, 2000, 12 (9) : 1278-1280.
  • 6C. Michiel, R. Atkinson, I. Andonovic et al.. Interferometric noise eharacterisation of a 2 D time spreading wavelength hopping OCDMA networks using FBG encoding/decoding [C]. International Conference on Tramsparent Optical Netuorks, 2007, Tu. B1(2), 114-117.
  • 7X. Wang, K. T. Chan. A sequentially self-seeded Fabry Perot laser for two-dimensional encoding/decoding of optical pulses[J]. IEEE J. Quantum Electron, 2003, 39(1) : 83-90.
  • 8N. Q. Ngo, S. Y. Li, R. T. Zheng. Electrically tunable dispersion compensator with fixed center wavelength using fiber bragg grating [J]. J. Lightwave Technol. , 2003, 21 ( 6 ) : 1568-1575.
  • 9T. Erdogan. Fiber grating spectra[J]. J. Lightwave Technol. , 1997, 15(8): 1277-1293.
  • 10T. I. Chane, H. Yoo, S. S. Min et al.. Wavelength mismatch tolerance in wavelength-hopping and time-spreading optical CDMA systems[J]. IEICE Trans. Commun. , 2003, E86-B(6): 2015-2018.

共引文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部