摘要
Brazed weldment with lattice structure has been widely used in aerospace industry. The non-destructive testing is often difficult because of the poor inspection accessibility. The present paper illustrates how the plane-like defect lack of brazing can be detected rapidly in this kind of structure by using ultrasonic Lamb wave. Experimental weldments are prepared and weld defect are tested using S2 mode Lamb wave. Acoustic shadow technique is employed based on Lamb wave testing method. The character of the tested D-scan image and A-scan signal is studied. The experimental results show that acoustic shadow based Lamb wave testing method is effective in detecting through-wall lack of brazing. Meanwhile, the D-scan tested data can be rapidly collected and easily interpreted compared with pulse echo bused Lamb wave testing method.
Brazed weldment with lattice structure has been widely used in aerospace industry. The non-destructive testing is often difficult because of the poor inspection accessibility. The present paper illustrates how the plane-like defect lack of brazing can be detected rapidly in this kind of structure by using ultrasonic Lamb wave. Experimental weldments are prepared and weld defect are tested using S2 mode Lamb wave. Acoustic shadow technique is employed based on Lamb wave testing method. The character of the tested D-scan image and A-scan signal is studied. The experimental results show that acoustic shadow based Lamb wave testing method is effective in detecting through-wall lack of brazing. Meanwhile, the D-scan tested data can be rapidly collected and easily interpreted compared with pulse echo bused Lamb wave testing method.
基金
The work is supported by the National Natural Science Foundation of China （51005056,51175113）, the Fundamental Research Funds for the Central Universities （ Grant No. HIT. NSRIF. 2009035）.
