期刊文献+

一种新构型3-RRRRR并联微动机构的研究 被引量:2

Research on a Kind of New Structured 3-RRRRR Parallel Micromanipulator
下载PDF
导出
摘要 基于3-RRRRR并联机构提出了一种由压电陶瓷驱动的新构型并联微动机构,推导出了单个柔性转动副的转角公式和驱动力公式,得到了输入驱动力和机构末端输出位移之间为线性关系,进而得到机构最大驱动力和工作空间;同时得到输入电压与输出位移之间也为线性关系,制作了3-RRRRR并联微动机构实验样机,并进行了实验测试,研究结果为该并联微动机构的应用奠定了基础。 This paper put forward a new structured parallel micromanipulator driven by piezoelectric ceramic, which was based on 3-RRRRR parallel mechanism. The corner formula of single flexibility revolute pair and the driving force formula were deduced. The relationship between driving force and output displacement of the mechanism end was also established, and then the maximum driving force and working space of the mechanism were obtained; A relationship between input voltage and output displacement was set up,and a 3-RRRRR parallel micromanipulator prototype was produced and tested. The foundation was layed for applications of this parallel micromanipulator.
机构地区 燕山大学
出处 《中国机械工程》 EI CAS CSCD 北大核心 2011年第22期2662-2666,共5页 China Mechanical Engineering
基金 教育部科学技术研究重点项目(208015) 河北省高等学校科学技术研究资助重点项目(ZH2011236)
关键词 3-RRRRR 微动机构 构型设计 静力学 3-RRRRR micromanipulator model design statics
  • 相关文献

参考文献6

  • 1Ellis G W. Piezoelectric Micromanipulators[J]. Sci- ence Instruments and Techniques, 1962,138 : 84-91.
  • 2Dong W,Sun L N,Du Z J. Design of a Prfcisi--on Compliant Parallel Positioner Driven by Dualpie-- zoelectric Actuators [J]. Sensors and Actuators, 2007,135 : 250-256.
  • 3李剑锋,费仁元,刘德忠,吴光中,管长乐,杨小勇.基于高频微幅振动的微操作机器人实验系统[J].北京工业大学学报,2008,34(3):225-230. 被引量:1
  • 4Kim H S, Cho Y M. Design and Modeling of a Novel 3-- DOF Precision Micro-- stage[J]. Mechatronics, 2009,19 ~598-608.
  • 5Smith S T,Badam I V G,Dale J S. Elliptical Flexure Hinges[J] Review of Scientific Instruments, 1997, 68(3) .. 1474-1482.
  • 6Nicolae L, Jeffrey S N, O, Malley E P. Parabolic and Hyperbolic Flexure Hinges : Flexibility, Motion Pre- cision and Stress Characterization Based on Compli- ance Closed--form Equations [J] Precision Engi- neering,2002,26 : 183-192.

二级参考文献9

  • 1李剑锋,吴光中,费仁元,刘德忠,管长乐,杨小勇.3-RUU微动并联机构的尺寸型模型及性能图谱[J].机械工程学报,2005,41(5):142-146. 被引量:6
  • 2TANIKAWA T, ARAI T, MASUDA T, et al. Development of a micro-manipulation system having a two-fingered microhand[J]. IEEE Trans on Robotics and Automation, 1999, 15(1) : 152-162.
  • 3YU S, NELSON B J. Microrobotic cell injection[C]//Proc of 2001 IEEE Int Conf on Robotics and Automation, Seoul, Korea: IEEE Robotics and Automation Society, 2001: 620-625.
  • 4YI B J, CHUNG G B, NA H Y. Design and experiment of a 3-DoF parallel micro-mechanism utilizing flexure hinges[J].IEEE Trans on Robotics and Automation, 2003, 19(4): 604-612.
  • 5PORTMAN V T, SANDLER B Z, ZAHAVI E. Rigid parallel platform for precision 3-D micro-manipulation: theory and design application[J]. IEEE Trans on Robotics and Automation, 2000, 16(3) : 629-643.
  • 6ARAI F, AMANO T, FUKUDA T, et al. Mechanical micro-dissection by micro-knife using ultrasonic vibration and ultra fine touch probe sensor[C]//Proc of the 2001 IEEE Int Conf on Robotics and Automation, Seoul: IEEE Robotics and Automation Society, 2001: 21-26.
  • 7TSAI L W, JOSHI S. Comparison study of architectures of four 3-degree-of-freedom translational parallel manipulators[ C]// IEEE Int Conf on Robotics and Automation, Seoul. IEEE Robotics and Automation Society, 2001: 1283-1288.
  • 8LIU X J, WANG J S, GAO F, et al. On the design of 6-dof parallel micro-motion manipulators[C]. IEEE/RSJ Int Conf on Intelligent Robots and System, Hawii: IEEE Robotics and Automation Society, 2001. 343-348.
  • 9管长乐 费仁元 刘德忠 等.压电陶瓷驱动器开环控制模型的建立.机械科学与技术,2005,(6):22-25.

同被引文献10

引证文献2

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部