期刊文献+

大型直立设备现场安装辅助装置设计及有限元验证 被引量:1

Structural design and finite element verification of auxiliary device for installation of large vertical equipment
下载PDF
导出
摘要 针对石化行业的大型直立圆柱壳设备的现场安装方式,设计一种新型的现场安装辅助装置,在此基础上应用有限元分析软件ANSYS对该辅助装置进行验证,结果表明:新型现场安装辅助装置的强度和刚度均能满足工作状况的需要,对实际应用具有参考意义. Considering the installation of vertical cylindrical shell equipments in large petrochemical industries,a new type of auxiliary device for installation of large vertical equipments was designed, Its stiffness and strength were analyzed by using finite element analysis software ANSYS. The results show they can meet the working requircments in of practical constructions. The design is of referential value to engineering applications.
作者 苏文献 季鹏
出处 《上海理工大学学报》 CAS 北大核心 2011年第5期508-510,共3页 Journal of University of Shanghai For Science and Technology
关键词 直立设备 安装辅助装置设计 有限元验证 vertical equipment design of auxiliary installation device finite element verification
  • 相关文献

参考文献6

  • 1耿焕然.大型立式设备现场拼装焊缝焊后热处理稳定性分析[J].机械设计与制造,2005(11):122-124. 被引量:6
  • 2陈洪军等编著,余伟炜,高炳军.ANSYS在机械与化工装备中的应用[M]中国水利水电出版社,2006.
  • 3张洪武等.有限元分析与CAE技术基础[M]清华大学出版社,2004.
  • 4龚曙光主编,罗显光等.ANSYS基础应用及范例解析[M]机械工业出版社,2003.
  • 5王国强.实用工程数值模拟技术及其在ANSYS上的实践[M]西北工业大学出版社,1999.
  • 6朱伯芳.有限单元法原理与应用[M]中国水利水电出版社,1998.

二级参考文献5

  • 1JB4710—92.钢制塔式容器.[S].,1992..
  • 2刘鸿方.材料力学[M].高等教育出版社,..
  • 3庞国东.燕化建安公司C-301塔焊后热处理稳定性校核计算书[Z].,1997.7..
  • 4耿焕然 燕化建安公司.DA-203塔焊后热处理稳定性校核计算书[Z].,1994.10..
  • 5GBl50.钢制压力容器.[S].,..

共引文献5

同被引文献20

  • 1HELLER J G, SASSO R C, PAPADOPOULOS S M, et al. Comparison of Bryan cervical disc arthroplasty with anterior cervical decompression and fusion: clinical and radiographic results of a randomized, controlled, clinical trial [J]. Spine, 2009, 34(2): 101-107.
  • 2PHILLIPS F M, ALLEN T R, REGAN J J, et al. Cervical disc replacement in patients with and without previous adja- cent level fusion surgery: a prospective study [J]. Spine, 2009, 34(6): 556-565.
  • 3MATSUNAGA S, KABAYAMA S, YAMAMOTO T, et al. Strain on intervertebral discs after anterior cervical decom- pression and fusion[J]. Spine, 1999, 24(7): 670-675.
  • 4MUMMANENI P V, HAID R W. The future in the care of the cervical spine: interbody fusion and arthroplasty [J]. J Neurosurg Spine, 2004, 1(2): 155-159.
  • 5ELSAWAF A, MASTRONARDI L, ROPERTO R, et al. Effect of cervical dynamics on adjacent segment degeneration after anterior cervical fusion with cages [J]. Neurosurg Rev, 2009, 32(2): 215-224; discussion 224.
  • 6MATGE G, EIF M, HERDMANN J, et al. Dynamic cervical implant (DCITM): clinical results from an international multi- center prospective study [J]. Paradigm Spine, 2009, 1: 1-3.
  • 7ZHU Ruofu, YANG Huilin, WANG Zhidong, et al. Com- parisons of three anterior cervical surgeries in treating cervical spondylotic myelopathy [J]. BMC Musculoskelet Disord, 2014, 15(1): 233.
  • 8MO Zhongjun, ZHAO Yanbin, WANG Lizhen, et al. Biome- chanical effects of cervical arthroplasty with U-shaped disc implant on segmental range of motion and loading of sur-rounding soft tissue [J]. Eur Spine J, 2014, 23(3): 613-621.
  • 9PANJABI M M, WHITE A A 3rd, JOHNSON R M. Cervi- cal spine mechanics as a function of transection of components [J]. J Biomech, 1975, 8(6); 327-336.
  • 10TEO E C, NG H W. Evaluation of the role of ligaments, fac- ets and disk nucleus in lower cervical spine under compression and sagittal moments using finite element method [J]. Med EngPhys, 2001, 23(3): 155-164.

引证文献1

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部