期刊文献+

膜片式先导水压溢流阀的研制 被引量:2

Development of a Pilot Operated Water Hydraulic Pressure Relief Valve with Membrane Sealing
下载PDF
导出
摘要 阐述了先导型水压溢流阀研制的技术难点,设计了一种新型先导水压溢流阀,并制作了样机。样机具有压力可调范围大,启闭特性好,压力超调量小,压力响应快等优点。 The difficulties of a pilot operated hydraulic water pressure relief valve was describe.A new pilot operated water hydraulic pressure relief valve was designed.A prototype was made which had a wide range in pressure adjusting,good open and close performances,small overshoot and rapid response.
机构地区 华中科技大学
出处 《流体机械》 CSCD 北大核心 2011年第10期16-18,共3页 Fluid Machinery
关键词 水液压技术 先导型溢流阀 膜片密封 water hydraulic technology pilot operated pressure relief valve membrane sealing
  • 相关文献

参考文献2

  • 1Usher S. Mains water hydraulics - The state of the art, putting water to work [ A ]. Proceedings of Water - basedfluids in hydraulic applications [ C ]. London, UK, March 13, 2001.
  • 2贺小峰,王学兵,嵇碧波,刘银水,李壮云.先导式水压溢流阀的设计[J].中国机械工程,2005,16(18):1625-1628. 被引量:19

二级参考文献15

  • 1宋鸿尧 丁忠尧 等.液压阀设计与计算[M].北京:机械工业出版社,1979..
  • 2Trostmann E. Water Hydraulics Control Technology. New York: Marcel Dekker, Inc. , 1996
  • 3Paoluzzi R, Borghi M, Milani M. Stationary and Dynamic Analysis of a Water Relief Valve. Forth JHPS International Symposium, Tokyo, 1999
  • 4Scheffels G. Developments in Water Hydraulics.Hydraulics & Pneumatics, 1996,49(12) : 33~34
  • 5Takayuki Nakanishi, Satoru Hayashi, Toshiyuki Hayase, et al. Numerical Simulation of Water Hydraulic Relief Valve. The Fourth JHPS International Symposium on Fluid Power, Tokyo, 1999
  • 6刘银水.[D].武汉:华中科技大学,2002.
  • 7赵连瑞.消除溢流阀哨叫噪声的研究[J].液压与气动,1986,(2):21-23.
  • 8高志恒 邓政瑞 李代德.溢流阀的稳定性和噪声的研究[J].液压与气动,1981,(3):27-30.
  • 9Heron R A. The control of Cavitation in Valves.7th International Fluid Power Symposium, Bath,England, 1986
  • 10凖鈴木理 鈴木健兒 加藤羲幸.水壓リリ一フ弁の開發[A]..日本機械學會第74期通常德會講演會講演論文集(Ⅲ)[C].東京,1997..

共引文献18

同被引文献15

  • 1贺小峰,黄国勤,朱碧海,刘银水,李壮云.海水液压动力驱动的水下作业工具系统[J].液压与气动,2004,28(8):49-51. 被引量:7
  • 2朱兴龙,周骥平.运动解耦机理分析与解耦关节设计[J].中国机械工程,2005,16(8):674-677. 被引量:14
  • 3王鲁敏,李艳文.基于Matlab的教学型机器人空间运动轨迹仿真[J].机械与电子,2005(9):55-57. 被引量:18
  • 4刘银水,朱玉泉,李壮云.水压传动技术的特征与新进展[J].液压与气动,2006,30(2):66-69. 被引量:18
  • 5Mizutani Motoki, Maruyama Haruo, Ito Kazuyuki Development of autonomous snake-like robot for use in rubble[A].IEEE International Symposium on Safety, Security, and Rescue Robotics[C].2012:1-7.
  • 6Suzuki Kenji, AkazawaSho, NakaoYohichi. Development of cam-drive type proportional valve for water hydraulics[J]. International Journal of Automation Technology, 2012, 6(4): 450-456.
  • 7Huaz, Wei S. Optimization of floating plate of water hydraulic internal gear pump[A].The 8th JFPS International Symposium on Fluid Power, Okinawa[C].2011:592-598.
  • 8LuoXiaohui, He Xiaofeng,Cao Shuping,et al.Theoretical and experimental analysis of a one-stage water hydraulic relief valve with a one-way damper[J].Journal of Pressure Vessel Technology, Vol. 135, No.6, 2013.
  • 9Luo Liang, He Xiaofeng, Den Ben, et al. Theoretical and experimental research on a pressure reducing valve for a water hydraulic vane pump[J].Joumal of Pressure Vessel Technology, Vo1.136, No.2, 2014.
  • 10Botturi D,Martelli S,Fiorini P.A geometric method for robot workspace compution[A].The 1 lth International Conference on Autonomous Robots and System. Verona Verona University Publications[C].2003.

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部