Simulation applied to working frequency selection in large-scale vi- brating screen's design
被引量:3
Simulation applied to working frequency selection in large-scale vi- brating screen's design
参考文献12
-
1张楠,侯晓林,闻邦椿.基于动态优化设计方法振动筛设计的研究[J].煤矿机械,2008,29(3):12-15. 被引量:16
-
2杨帅,王太勇.大型非线性共振筛动力学建模及分析[J].煤炭学报,2009,34(3):405-409. 被引量:7
-
3任紫亭,李惠彬,金婷,张成勇.大型振动筛激振器振动测试与故障分析[J].煤矿机械,2008,29(11):184-187. 被引量:12
-
4王春彦,岳大鑫.振动筛振动电机的选取与激振力的调整[J].农业装备与车辆工程,2007,45(2):50-51. 被引量:10
-
5贺孝梅,刘初升,张成勇.超静定网梁激振结构大型振动筛动态特性[J].煤炭学报,2008,33(9):1040-1044. 被引量:38
-
6朱福先,殷祥超,马景槐.大型振动筛动力学有限元简化模型初探[J].煤矿机械,2009,30(1):107-109. 被引量:5
-
7辛晓辉,曹树谦,陈予恕.大型双层非线性共振筛强度计算的有限元建模技术[J].煤炭学报,2006,31(1):108-111. 被引量:12
-
8李朝峰,刘杰,毛居全,闻邦椿.大型复杂机械节点导入建模及有限元分析[J].农业机械学报,2007,38(8):124-127. 被引量:5
-
9张路霞,李云峰.振动筛筛分效率的影响因素分析[J].煤矿机械,2008,29(11):74-76. 被引量:48
-
10黄文,宫美英,陆宏,乔长锁.大型冷矿直线振动筛的结构动力学分析与设计改进[J].矿山机械,2009,37(9):104-107. 被引量:6
二级参考文献54
-
1王宏雁,张丹.汽车座椅有限元建模与计算[J].同济大学学报(自然科学版),2004,32(7):947-951. 被引量:33
-
2吴丽娟,李惠彬.直线振动筛振动特性分析[J].机械工程师,2004(8):45-47. 被引量:33
-
3李长胜,刘宏飞,王志伟,孟玲琴.直线振动筛分机筛箱质心的计算机辅助计算[J].农业机械学报,2004,35(5):232-234. 被引量:8
-
4朱维兵.钻井筛处理量的数学建模和试验研究[J].石油矿场机械,2004,33(6):36-38. 被引量:2
-
5刘建文,于德介.直线振动筛故障诊断及治理措施研究[J].选煤技术,1993(5):34-37. 被引量:1
-
6张永锋,尹忠俊,徐明,程从山.振动筛的动应力分析[J].冶金设备,2005(2):42-43. 被引量:23
-
7辛晓辉,曹树谦,陈予恕.30m^2双层非线性共振筛模态计算与动态性能评价[J].煤炭学报,2005,30(2):237-240. 被引量:17
-
8张晓伟,姚红良,李小彭,闻邦椿.基于“三化”综合设计方法的振动机械设计[J].机械设计,2005,22(6):6-9. 被引量:5
-
9王虎,桂长林.参数化有限元程序在活塞热负荷分析中的应用[J].农业机械学报,2005,36(8):9-12. 被引量:2
-
10丁凯.ZKB3675大型直线振动筛动强度分析[J].矿山机械,1995,23(6):27-30. 被引量:9
共引文献167
-
1聂志恒.大型振动筛横梁铆接结构优化研究[J].煤炭工程,2022,54(S01):167-170. 被引量:1
-
2董晓磊.离心机脱水效果影响因素研究[J].煤炭工程,2022,54(S01):107-110. 被引量:2
-
3康日东.钻井液直线振动筛参数的优化设计[J].石油矿场机械,2007,36(3):34-36. 被引量:1
-
4王红兵,张路霞.探析影响直线振动筛筛分效果的若干因素[J].现代制造技术与装备,2008,44(4):29-30. 被引量:15
-
5张楠,侯晓林,闻邦椿.四电机驱动自同步振动筛同步稳定性判据[J].矿山机械,2008,36(19):99-103. 被引量:4
-
6张楠,侯晓林,闻邦椿.三激振器同相回转振动系统的同步运动过程[J].煤矿机械,2008,29(11):30-32.
-
7张路霞,李云峰.振动筛筛分效率的影响因素分析[J].煤矿机械,2008,29(11):74-76. 被引量:48
-
8冀连权,刘初升,范欢迎,闫俊霞,蒋小伟.新型两自由度直线振动筛的设计[J].选煤技术,2008,36(5):20-22. 被引量:1
-
9韩冰峰,安晓卫,徐文彬,李秀艳,张婷.香蕉型振动筛静力学与固有特性有限元分析[J].沈阳理工大学学报,2008,27(4):66-70. 被引量:3
-
10方瑞.提高振动筛工作效率的措施[J].现代面粉工业,2009,23(1):30-33. 被引量:4
同被引文献35
-
1ZHAO, Lala, LIU, Chusheng, YAN, Junxia.A virtual experiment showing single particle motion on a linearly vibrating screen-deck[J].Mining Science and Technology,2010,20(2):276-280. 被引量:11
-
2左亮,肖绯雄.橡胶Mooney-Rivlin模型材料系数的一种确定方法[J].机械制造,2008,46(7):38-40. 被引量:57
-
3孙旖.有限元分析在大型振动筛设计中的应用[J].选煤技术,2008,36(4):11-14. 被引量:6
-
4贺孝梅,刘初升,张成勇.基于增广拉格朗日乘子法的大型振动筛动态优化设计[J].中国矿业大学学报,2009,38(1):80-85. 被引量:12
-
5赵啦啦,刘初升,闫俊霞,蒋小伟,朱艳.不同振动模式下颗粒分离行为的数值模拟[J].物理学报,2010,59(4):2582-2588. 被引量:18
-
6赵啦啦,刘初升,闫俊霞,蒋小伟,张阳.振动筛面颗粒流三维离散元法模拟[J].中国矿业大学学报,2010,39(3):414-419. 被引量:31
-
7CHEN Yanhua,TONG Xin.Modeling screening efficiency with vibrational parameters based on DEM 3D simulation[J].Mining Science and Technology,2010,20(4):615-620. 被引量:13
-
8贺孝梅,刘初升,张成勇.基于多频约束和解析灵敏度法的大型振动筛优化设计[J].中南大学学报(自然科学版),2011,42(3):664-670. 被引量:9
-
9李洪昌,李耀明,唐忠,徐立章,赵湛.基于EDEM的振动筛分数值模拟与分析[J].农业工程学报,2011,27(5):117-121. 被引量:144
-
10Wang Guifeng Tong Xin.Screening efficiency and screen length of a linear vibrating screen using DEM 3D simulation[J].Mining Science and Technology,2011,21(3):451-455. 被引量:19
引证文献3
-
1宋宝成,刘初升,彭利平,李珺.Dynamic analysis of new type elastic screen surface with multi degree of freedom and experimental validation[J].Journal of Central South University,2015,22(4):1334-1341. 被引量:6
-
2夏绪辉,荆为民,张泽琳,王蕾,张欢.振动筛仿真研究、应用现状及发展趋势[J].中南大学学报(自然科学版),2020,51(10):2689-2706. 被引量:19
-
3卢峻达,许林云,杭晓晨,张涛.基于有限元法的BF142型刨花振动筛结构强度分析[J].林业工程学报,2022,7(1):145-152. 被引量:7
二级引证文献31
-
1郭关柱,张易楷,罗亚南,毛韦迪.四层筛式花椒筛选机设计与试验[J].农业机械学报,2022,53(12):203-211.
-
2宋宝成,武继达,江海深.双幅变孔径筛面磷矿石筛分特性分析[J].矿业研究与开发,2019,39(12):149-152. 被引量:1
-
3夏绪辉,荆为民,张泽琳,王蕾,张欢.振动筛仿真研究、应用现状及发展趋势[J].中南大学学报(自然科学版),2020,51(10):2689-2706. 被引量:19
-
4宋宝成,武继达,江海深.双幅变孔径筛面动力学与防堵孔特性分析[J].矿业研究与开发,2020,40(10):174-177. 被引量:3
-
5杨利平,王子涛.提高碎矿系统能力的实践[J].有色设备,2021,35(4):92-95. 被引量:2
-
6江海深,于世杰,赵跃民,段晨龙,赵建军,王宏.刚柔耦合高弹性筛面运动学与料群透筛分布规律[J].中国矿业大学学报,2021,50(5):923-932. 被引量:5
-
7卢峻达,许林云,杭晓晨,张涛.基于有限元法的BF142型刨花振动筛结构强度分析[J].林业工程学报,2022,7(1):145-152. 被引量:7
-
8陈宁,张红兵,李万祥,李雄兵.变时滞反馈散料加工系统的参数设计[J].振动与冲击,2022,41(6):229-235. 被引量:1
-
9曾浩,周成军,周新年,郑丽凤,巫志龙.双承载货运索道跑车结构分析与优化[J].森林工程,2022,38(4):125-130. 被引量:1
-
10李楠.煤泥筛选筛板弧形座疲劳寿命分析研究[J].机械管理开发,2022,37(7):146-148.
-
1WANG Yingfeng LIU Zhijing.Joint Communication and Processor Frequency Selection for Low-Energy Systems under Timing Constraints[J].China Communications,2010,7(4):132-136. 被引量:3
-
2Shi Xin-zhi,Shi Zhen-hua,Wen Bi-yang.Noise Controlling Methods in Frequency Selection Detecting Radar[J].Wuhan University Journal of Natural Sciences,2001,6(4):807-811.
-
3李诚.车载光通信设备振动分析和隔振设计[J].光通信技术,2014,38(5):60-62. 被引量:3
-
4闫世伟,杨志刚.收集人体动能的压电俘能器研究[J].压电与声光,2015,37(5):757-759. 被引量:2
-
5宋宝安,赵卫疆,任德明,曲彦臣,张合勇,钱黎明,胡孝勇.Passively Q-switched laser with single longitudinal mode based on the frequency selection of grating and F-P etalon in twisted-mode folded cavity[J].Chinese Optics Letters,2009,7(9):805-808. 被引量:2
-
6白凤仙,马桂帅,董维杰,孙建忠.悬臂梁式压电振动能量收集系统输出功率的优化研究[J].电子学报,2014,42(5):883-889. 被引量:5
-
7师甜,肖勇.一种大型可展开天线结构频率调整技术研究[J].现代电子技术,2013,36(11):75-78. 被引量:2
-
8游藩,李本,王强,陈敏.DIP引脚应变分析[J].火力与指挥控制,2016,41(3):173-176.
-
9吴静,姚宇峰,常晓雅,王鑫磊.基于RLC谐振电路研究非接触弹性摆受迫振动的运动特性[J].大学物理,2015,34(3):46-49.
-
10周井玲,李玉静,左伟明.三点接触疲劳试验机的测试信号相干函数分析[J].自动化仪表,2013,34(7):9-11.
;