摘要
用Sol-Gel法合成了SiO2包覆SiO2∶Tb3+的纳米核壳颗粒(用SiO2∶Tb3+@SiO2表示),并研究了核壳配比和制备工艺对其发光性能的影响。TEM和EDS表明SiO2溶液成功包覆于SiO2∶Tb3+表面;通过测试荧光性能,发现制备工艺为壳层先陈化再放入核、核壳配比为1.2g∶25mL时,SiO2∶Tb3+@SiO2较未包覆SiO2∶Tb3+样品PL光谱强度增强,通过测试核壳结构材料的时间分辨光谱得到SiO2∶Tb3+纳米颗粒经SiO2包覆后的荧光寿命延长。
The authors synthesized the core-shell nanopart icles of SiO2-coated SiO2∶Tb3+ by using sol-gel method(SiO2∶Tb 3+@SiO2),and studied the influence of core-shell ratio and preparation craftwork on its luminescence properties.The photograph of TEM and EDS showed that SiO2∶Tb3+ were coated successfully by SiO2.The authors found th at the samples of SiO2∶Tb3+@SiO2 prepared by mixing of core and shell after shell aging with the ratio of core/shell being 1.2 g/25 mL had the stron ger fluorescence intensity.Time-resolved spectra showed that the SiO2∶T b 3+@SiO2 had longer fluorescence life time than SiO2∶Tb3+.
出处
《光谱学与光谱分析》
SCIE
EI
CAS
CSCD
北大核心
2011年第12期3190-3193,共4页
Spectroscopy and Spectral Analysis
基金
西北大学研究生创新基金项目(09YSY08)
国家自然科学基金项目(20876125)
高等学校博士学科点专项科研基金项目(20096101110013)
陕西省自然基金项目(2011JM1001
2010JZ002)资助