期刊文献+

HfB_2-Si_3N_4复合材料浆料流变性的研究

Study on the Rheological Behavior of HfB_2-Si_3N_4 Composites Slurries
下载PDF
导出
摘要 采用注凝成型技术研究了HfB2-Si3N4复合材料浆料的流变性能。主要讨论了pH值、分散剂、固相含量、球磨时间等对HfB2-Si3N4复合材料浆料粘度的影响。结果表明:当分散剂用量为8%(体积分数),pH值为10.9,球磨时间控制在15~20h时,可制得固相体积含量为38%,粘度为600mPa.s的HfB2-Si3N4复合浆料。 The gel-casting processing of HfB2-Si3N4 composites was studied in this research.The effects of the pH,dispersant,the solid volume content and the mill time on the viscosity of the HfB2-Si3N4 slurry were investigated.The results show that the solid content of the slurry is 38% and the viscosity is 600 mPa s when the content of dispersant is 8vol.%,pH is 10.9,the mill time is 15-20 h.
出处 《现代技术陶瓷》 CAS 2008年第3期8-11,共4页 Advanced Ceramics
关键词 二硼化铪 氮化硅 注凝成型 流变性 浆料 HfB2 Si3N4 gel-casting rheological behavior slurry
  • 相关文献

参考文献11

二级参考文献67

  • 1黄勇,杨金龙,谢志鹏,李建保.高性能陶瓷成型工艺进展[J].现代技术陶瓷,1995,16(4):4-11. 被引量:27
  • 2张晓峰,李海林,吴东棣.稳定的α-Al_(2)O_(3)注浆料的制备[J].硅酸盐通报,1996,15(4):32-35. 被引量:3
  • 3史可顺.凝胶注模成型工艺的若干进展[J].硅酸盐学报,2001,29(4):50-55.
  • 4Omatete O.O. ,Janney M. A, Strehlow R.A. Gelcasting. a new ceramic formlng process [ J ]. Am. Ceram. Soc. Bull. , 1991,70 ( 10) :1641-1649.
  • 5Janney M. A. Method for molding ceramic powder [ P ]. US. No4894194,1990 - 1 - 16.
  • 6Janney M. A., Omatete O. O. Method for molding ceramic powders using a water-bused gelcasting[ P]. US. No 528362,1991 - 7 - 2.
  • 7Janney M. A., Omatete O. O. Method for molding ceramic powers using a water-busod gelcasting process [P]. US. No 528362,1991 -7-2.
  • 8Young A. C., Omatete O. O., Janney M. A., et al. Gelcasting of alumina [J] .J. AM. Ceram. Soc., 1991,74(3) :612.
  • 9K. Prabhakaran, C. Pavithran. Gelcasting of alumina using ureaformaldehyde: Ⅱ . Gelation and ceramic forming[J]. Ceramics International,2000,26:67 ~ 71.
  • 10Xie, Z.P., Yang, J.L., Chen, Y. L., Huang, Y. Gelation forming of ceramic compacts using agarose [J]. Brit. Ceram. Trans., 1999,98,58.

共引文献60

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部