摘要
A special polyurethane coating designed for ductile iron pipe was developed. The effects of the ingredients on properties, such as viscosity, flow leveling, solidification-rate, adhesion and hardness, were researched. It was then analyzed in what ways the technical parameters, such as temperature and pressure, influence the coat quality. The results showed that the molar ratio and synthesizing conditions must be strictly controlled to obtain suitable pre-polymer viscosity by adjusting the formula ratio of the B component, satisfactory mechanical properties and cure rate can be obtained and bubbles in the coat can be avoided.
A special polyurethane coating designed for ductile iron pipe was developed. The effects of the ingredients on properties, such as viscosity, flow leveling, solidification-rate, adhesion and hardness, were researched. It was then analyzed in what ways the technical parameters, such as temperature and pressure, influence the coat quality. The results showed that the molar ratio and synthesizing conditions must be strictly controlled to obtain suitable pre-polymer viscosity by adjusting the formula ratio of the B component, satisfactory mechanical properties and cure rate can be obtained and bubbles in the coat can be avoided.
