期刊文献+

构建基于虚拟映射对象的IEC61850系统 被引量:2

The Application of Virtual Mapping Objects in IEC61850 System
下载PDF
导出
摘要 针对可能出现的各种各样的通信系统,IEC61850引入了特殊通信服务映射(SCSM),IEC61850-8-1规定了由IEC61850抽象通信服务接口(ACSI)到制造报文规范(MMS)的SCSM规范,但本质上SCSM与目标映射系统无关,对此笔者提出虚拟映射对象的思想,利用该方法建立的IEC61850系统数据库,结构层次清晰,具有明显的ACSI接口层,与目标映射通信系统采用的协议无关,从而为IEC61850系统的拓展作了有益的探索。 IEC61850 adopts specific communication service mapping (SCSM) to different communication systems. IEC61850-8-1 defines how IEC61850 abstract communication service interface (ACSI) is mapped to MMS.On the other hand, ACSI can be theorically mapped to different target communication systems, based on which the virtual mapping object is discussed in this paper. It points out that the IEC61850 system database set up based on virtual mapping object has the following benefits as clear struct level, good ACSI interface, independence of target system protocol . It also gives a practicable thought on how to update IEC61850 system easily.
出处 《电网技术》 EI CSCD 北大核心 2006年第S2期419-422,共4页 Power System Technology
关键词 IEC61850 ACSI 虚拟 数据库 映射 IEC61850 ACSI Virtual Database Mapping
  • 相关文献

参考文献3

二级参考文献16

  • 1IEC 61850: Communication networks and system in substations, part 5[S]. 1999.
  • 2IEC 61850: Communication networks and system in substations, part 1 to part 10 [S]. 1999.
  • 3UCA 2.0 Standard Document. UCATM profiles; draft 1.1, copyright electric power research institute (EPRI)[S]. 1998.
  • 4Haud J, Janz A, Rudolph T et al. A pilot project for testing the standard drafts for open communication in substations-First experiences with the future standard IEC 61850[DB/OL]. http://www.tde.alstom.com/p-c/ftp/docs/vavers/PO~5TRE ~f.
  • 5ISO/IEC 9506. Industrial automation systems manufacturing message specification[S].
  • 6祁寿枝,电力自动化设备,2000年,25卷,7期
  • 7Service Definition. ISO/ IEC95 0 6 - 1 . 1990
  • 8Protocol Specification. ISO/ IEC 95 0 6 - 2 . 1990
  • 9Com panion Standard for Robotics. ISO/ IEC 95 0 6 - 3 . 1991
  • 10Com panion Standard for Num ericalControl. ISO/ IEC 95 0 6 - 4 . 1992

共引文献553

同被引文献38

  • 1王丽华,马君华,王传启,马长武,江涛,韩明峰,王志华,张丽胜,种惠敏.变电站配置描述语言SCL的应用研究[J].电网技术,2006,30(S1):93-96. 被引量:13
  • 2张结.IEC61850目标内涵分析[J].电网技术,2004,28(23):76-80. 被引量:22
  • 3常弘,茹锋,薛钧义.IEC61850语义信息模型的实现[J].电网技术,2005,29(12):39-42. 被引量:23
  • 4李蓓,沐连顺,苏剑,崔立忠,李镇平.基于关系模型映射的IEC 61850 SCL配置器建模[J].电网技术,2006,30(10):94-99. 被引量:21
  • 5张禾瑞.高等代数[M].北京:高等教育出版社,2005.
  • 6国家电网公司.Q/GDW383-2009智能变电站技术导则[S].北京:中国电力出版社,2009.
  • 7IEC 61850-1 communication networks and systems in substations part 1:introduction and overview[S].2003.
  • 8IEC 61850-8-1 communication networks and systems in substations part8-1:specific communication service mapping(scsm)–mappings to MMS(ISO 9506-1 and ISO 9506-2)and to ISO/IEC 8802-3[S].2004.
  • 9IEC 61850-5 communication networks and systems in substations part 5:communication requirements for functions and device models[S].2003.
  • 10IEC 61850-7-3 communication networks and systems in substations part 7-1:basic communication structure for substations and feeder equipment principles and models[S].2003.

引证文献2

二级引证文献69

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部