期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

BFe30-1-1(焊态)在海水中的应力腐蚀试验研究 被引量：6

Experimental Research on SSRT of BFe30-1-1(Welded) In Seawater
原文传递
导出
摘要 本文着重研究BFe30-1-1(焊态)材料在海水中的应力腐蚀行为,采用慢应变速率应力腐蚀试验方法,评定BFe30-1-1(焊态)材料在海水中发生应力腐蚀开裂的敏感性。 In this paper SSRT of Bfe30-1-1 in seawater is mainly researched, and SSRT tests are adopted to evaluate the sensibility of SCC of Bfe30-1-1 in seawater.
作者 李孝华 陈玮 刘晓冬 杨建国 徐翔
机构地区 安徽海丰精细化工股份有限公司 合肥通用机械研究院
出处 《中国化工装备》 CAS 2005年第3期30-35,共6页 China Chemical Industry Equipment
关键词 慢应变速率 海水 应力腐蚀开裂 SSRT,seawater,SCC
分类号 TG172.5 [金属学及工艺—金属表面处理]
  • 相关文献

参考文献1

二级参考文献11

  • 1Chen Xuedong Guan Weihe Chen Wenhu Yao Zuoquan Hefei General Machinery Research Institute, Hefei 230031, ChinaGu Xuedong Wang Zhaowei Shanghai Gaoqiao Petrochemical Company.FAILURE ANALYSIS AND INSPECTION OF CRACKING OF IN-SERVICE CATALYTIC REGENERATOR[J].Chinese Journal of Mechanical Engineering,2002,15(2):167-172. 被引量：1
  • 2Parkins R.N.,Usher R.The Effect of Nitrage Solutions in Producing Stress Corrosion Cracking in Mild Steel[A].First Intern. Congr. On Metallic Corrosion[C].London,1961.206.
  • 3Flis J.Action of Carbon in Stress Corrosion Cracking of Mild Steel in Nitrate Solutions[J].Corrosion, 1973, 29(1):37-41.
  • 4Flis J.,Scully J.C.The Role of Interstitial and Substitional Impurities in Stress Corrosion Cracking of Low Carbon Steel in Nitrate Solution[J].Corrosion,1968,24(10):326-334.
  • 5Long L.M.,Lockington N.A.The mechanism of Stress Corrosion cracking in pure Fe-base alloys[J].Corros.Sci.,1971,11:853-872.
  • 6Mazille H., Uhlig H. H. Effect of Temperature and Some Inhititors on Stress Corrosion Cracking of Carbon Steels in Nitrate and Alkaline Solutions[J].Corrosion,1972,28(11):427-433.
  • 7Flis J., Mieluch J., Smialowski M. Electrochemical Behavior and Corrosion of Iron Crystals in Ammonium Nitrate Solutions[J].Corrosion,1964,20,(5):184-187.
  • 8Long L.M., Uhlig H.H. Effect of Carbon and Oxygen in Iron on Stress Corrosion Cracking in Nitrate Solution[J].J.Electrochem.Soc.,1965,112(10):964-967.
  • 9.催化再生系统设备开裂分析工作汇报[R].北京:中国石化北京设计院,1998,11..
  • 10杨德凤,刘凯,张金锐,龚宏.从催化裂化烟气分析结果探讨再生设备的腐蚀开裂[J].石油炼制与化工,2001,32(3):49-53. 被引量：29

共引文献6

同被引文献42

  • 1余存烨.PTA装置碱洗对设备腐蚀开裂影响讨论[J].腐蚀与防护,2007,28(12):637-641. 被引量：8
  • 2杨军,罗兵辉,柏振海.热处理制度对Ti_(49.2)Ni_(50.8)合金内耗性能的影响[J].中国有色金属学报,2005,15(10):1560-1565. 被引量：4
  • 3解挺,尹延国,朱元吉.马氏体不锈钢的热处理和性能[J].国外金属热处理,1996,17(6):38-40. 被引量：12
  • 4孙松青,陈凌,蒋家羚.PTA加氢反应器在碱洗条件下的安全分析[J].合成纤维工业,2006,29(4):28-30. 被引量：5
  • 5Bulent Aydemir, Erdinc Kaluc, Sinan Fank. Influence of heat treatment on hysteresis error of force transducers manufactured from 17-4PH stainless steel [J]. Measurement, 2006, 39(10) : 890 - 900.
  • 6Sinan Fank, Mehmet Demirkol. Effect of microstructure on the hysteresis performance of force transducers using AISI 4340 steel spring material [J]. Sensors and Actuators, 2006, A126: 25- 32.
  • 7Allgeier T, Evans W T. Mechanical hysteresis in force transducers manufactured from precipitation-hardened stainless steel[J]. Journal of Mechanical Engineering Science Part C, 1995, 209(2) : 125 - 132.
  • 8陶宝琪,王妮.电阻应变式传感器[M].北京:国防工业出版社,1993.
  • 9Rokuro Nishimura, Yasuaki Maeda. SCC evaluation of type 304 and 316 austenitic stainless steels in acidic chloride solutions using the slow strain rate technique [J]. Corrosion Science, 2004, 46: 769- 785.
  • 10Li J X, Chu W Y, Wang Y B, et al. In situ TEM study of stress corrosion cracking of austenitic stainless steel[J]. Corrosion Science, 2003, 45:1355 - 1365.

引证文献6

二级引证文献26

中国化工装备
2005年 第3期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部