Fabrication of W-Mo-Ti system flier-plate with graded impedance for generating quasi-isentropic compression 被引量：8

Fabrication of W-Mo-Ti system flier-plate with graded impedance for generating quasi-isentropic compression

导出

摘要 A fully dense W-Mo-Ti system flier-plate with graded impedance in its thickness direction was successfully fabricated by the method of powder metallurgy. The result of the impact experiment on a light gas gun showed that dynamic quasi-isentropic compression has been created. A fully dense W-Mo-Ti system flier-plate with graded impedance in its thickness direction was successfully fabricated by the method of powder metallurgy. The result of the impact experiment on a light gas gun showed that dynamic quasi-isentropic compression has been created.

作者 SHEN Qiang ZHANG Lianmeng XIONG Huaping HUA Jinsong TAN Hua

机构地区 State Key Laboratory of Materials Synthesis and Processing Laboratory of Shock Waves and Detonation Physics

出处《Chinese Science Bulletin》 SCIE EI CAS 2000年第15期1421-1424,共4页

关键词 W-Mo-Ti flier-plate with GRADED IMPEDANCE quasi-isentropic compression. W-Mo-Ti flier-plate with graded impedance quasi-isentropic compression

分类号 TH113 [机械工程—机械设计及理论]

引文网络
相关文献

参考文献9

1Xiong, Huaping, Zhang, Lianmeng, Shen, Qiang, Yuan, Runzhang .Densification of W-Ni-Cu and W-Fe-Cu Alloys at 1573 K[J].Journal of Materials Science & Technology,1999,15(1):94-96. 被引量：3
2经福谦.动态超高压技术(一)[J]爆炸与冲击,1984(03).
3Barker L M,Scott D D.Development of a high-pressure quasiisentropic plane wave generating capability. SAND .
4Jing F Q.Introduce to Experimental Equation of State. . 1986
5Chhabildas L C,Asay J R,Barker L M.Shear strength of tungsten under shock-and quasi-isentropic loading to 250GPa. .
6Chhabidas L C,Kmetyk L N,Reinhart WD,et al.Enchanced Hypervelocity Lanucher Capabilities to 16 km/s. International Journal of I mpcat Engineering . 1995
7Majima K.A study on sintered tianium alloy produced by blended elemental process. Journal of the Japan Society ofPowder and Powder Metallurgy . 1989
8Chhabildas,L.C.,Barker,L.M.Dynamic quasi-isentropic compression of tungsten. Shock Waves in Condensed Matter 1987 . 1998
9Jing Fuqian.Dynamic high pressure techniques. Physics . 1986

共引文献2

1沈强,张联盟,熊华平,华劲松,谭华.W-MO-Ti体系波阻抗梯度飞片的制备与准等熵压缩特性[J].科学通报,2000,45(8):878-881. 被引量：7
2沈强,窦金锋,张联盟,华劲松,谭华.W-Mo系复合材料的制备及其特性波阻抗[J].高压物理学报,2002,16(2):125-130. 被引量：2

同被引文献32

1张联盟,王传彬,沈强.梯度飞片材料的制备及其准等熵压缩技术[J].含能材料,2004,12(A02):348-351. 被引量：3
2邓承继,白晨,张联盟,袁润章.变密度Ti-Sc系梯度材料的制备[J].武汉科技大学学报,2005,28(3):228-230. 被引量：2
3经福谦.动态超高压技术(一)[J].爆炸与冲击,1984,4(3):1-9.
4[2]Chhabildas L C,Asay J R,Barker L M.Dynamic Quasi-isentropic Loading of Tungsten[J].High Pressure Research,1990,5:842-844.
5[5]Chhabildas L C,Kmetyk L N,Reihart W D,et al.Enhanced Hypervelocity Launcher Capabilities to 16 km/s[J].International Journal of Impact Engineering,1995,17:183-194.
6[6]Barker L M,Hollenbach R E.Shock Wave Studies of PMMA,Fused Silica and Sapphire[J].Journal of Applied Physics,1970,41:4208-4212.
7[7]Benedick W B,Assay J R.High Pressure Ramp-wave Generator[J].Bulletin of American Physics Society,1976,21:1298-1306.
8[10]Barker L M,Hollenbach R E.Laser Interferometer for Measuring High Velocities of Any Reflecting Surface[J].Journal of Applied Physics,1972,43(11):4669-4675.
9Chhabildas L C, Kmetyk L N, Reinhart W D, et al. Enhance hypervelocity launcher capabilities to 16 km/s [J]. Int J Impact Engng, 1995, 17(1): 183-194.
10Chhabildas L C, Asay J R, Barker L M. Shear strength of tungsten under shock and quasi-isentrophic loading to 250 GPa, SAND88-0306[R]. [S. l.] : Sandia National Laboratory, 1988.

引证文献8

1王传彬,沈强,裘惠广,张联盟.利用斜波发生器产生准等熵压缩的实验技术[J].武汉理工大学学报,2008,30(3):1-4.
2WANG You, HE Chu-ning and SHEN Jing-shu (Polymer Physics Laboratory, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100080, China) WU Li-heng and SONG Qing (China Textile Academy, Beijing 100025, China).Studies on the Condensed Structure of Vacuum Cast Atactic Polystyrene Films[J].Chemical Research in Chinese Universities,2000,16(4):363-368.
3何远航,董良慈,张庆明.波阻抗梯度飞片的特性研究[J].北京理工大学学报,2007,27(12):1050-1052. 被引量：3
4侯丽颖,季幸姝,吕志平,贺松其,文彬,蔡红兵.瘦素诱导HSC增殖的信号转导通路及保肝宁调控作用的实验研究[J].中医药通报,2008,7(2):61-62. 被引量：1
5李君,罗国强,沈强,张联盟,祝洪喜,邓承继.Mg-Cu密度梯度材料的流延法制备[J].复合材料学报,2012,29(2):93-97. 被引量：3
6JIN Jian,YUAN Chang-zhi.Empirical Study on the Relationship between Income and Consumption of Rural Residents in Hebei Province[J].Asian Agricultural Research,2010,2(2):20-22.
7QiangShen,LianmengZhang,HuaTan,FuqianJing.Wave impedance of W-Mo system composite[J].Journal of University of Science and Technology Beijing,2003,10(5):35-38. 被引量：1
8沈强.Preparation of Mg-Ti System Alloy and FGM with Density Gradient by Spark Plasma Sintering Technique[J].Journal of Wuhan University of Technology(Materials Science),2004,19(1):58-60. 被引量：1

二级引证文献9

1李光玉,连建设.Electroless Ni-P Deposition on Magnesium Alloy from a Sulfate Bath[J].Journal of Wuhan University of Technology(Materials Science),2008,23(1):60-64. 被引量：1
2郭香华,董良慈,何远航,张庆明.波阻抗梯度飞片超高速发射的数值模拟[J].北京理工大学学报,2008,28(4):287-289.
3朱玲旭,郭双全,张宇,葛昌纯.新型钨基面向等离子体材料的研究进展[J].材料导报,2011,25(15):42-45. 被引量：15
4徐吉敏,肖莉,黄建华,严明,黄艳,赵凤鸣,王明艳,叶放.紫七软肝方含药血清对巨噬细胞条件培养液诱导肝星状细胞活化后增殖的影响[J].中西医结合肝病杂志,2014,24(1):37-40.
5杨全涛,袁有录.等离子弧喷焊WC颗粒增强Fe基梯度涂层的制备及组织分析[J].焊接技术,2014,43(6):16-19. 被引量：1
6李阳城,刘维良,曾小军,冯龙,阮杰平.B_4C陶瓷流延膜的非水基流延制备工艺研究[J].中国陶瓷,2015,51(8):62-65.
7刘丽芝,王秉相,郑宇轩,余同希,周风华.Galilean炮在刚性壁上的回弹[J].力学与实践,2018,40(6):639-646. 被引量：1
8高江辉,张诗雨,姜文,程李威,王昊,彭程,何云,仲亚娟,林俊.超快高温烧结非对称梯度YSZ陶瓷[J].中国陶瓷,2022,58(10):14-23. 被引量：1
9王传彬.A Flier-plate Material with Graded Impedance Used in Dynamic High-pressure Physics[J].Journal of Wuhan University of Technology(Materials Science),2002,17(4):32-35.

1李瑰贤,李华敏,毕诸明.Research　on　Induction　Normal　Curvature　and　Critical　Curves　of　Quasi－ellipsoidal　Gear　Drive　with　Inner－toroidal　Teeth[J].Journal of Harbin Institute of Technology(New Series),1995,2(3):50-56.
2王砚军,刘佐民.TiC/Fe-Cr-W-Mo-V系自润滑金属陶瓷轴承烧结体的研制[J].轴承,2005(5):20-23. 被引量：5
3徐玲,谈宜东,张书练,孙利群.Measurement of Refractive Index Ranging from 1.42847 to 2.48272 at 1064 nm Using a Quasi-Common-Path Laser Feedback System[J].Chinese Physics Letters,2015,32(9):21-24. 被引量：1
4Kh.S.Karimov,T.A.Qasuria,Zubair Ahmad.Impedance hygrometer based on cellulose and CuPc[J].Journal of Semiconductors,2010,31(6):70-73.
5滕修仁,李亨荣.制备W-Mo复合靶时分层因素的探讨[J].中国钼业,1997,21(A00):5-7. 被引量：1
6麦世基.卡特彼勒小型履带式装载机系列又增新成员[J].工程机械,2011,42(9):67-67.
7李瑰贤,刘俐平,李华敏,毕诸明.Computer Simulation on Quasi-ellipsoidal Gear Transmission[J].Journal of Harbin Institute of Technology(New Series),1995,2(4):42-45.
8Yang Yun Wang Zheng Department of Engineering Mechanics, Qinghua University Kim Lock Song Institute of Biophysics, Chinese Academy of Sciences.CALCULATION AND IMPROVEMENT OF DYNAMIC CHARACTERISTICS OF CENTRIFUGE[J].Chinese Journal of Mechanical Engineering,2001,14(1):32-35.
9HUANG FeiMin,WANG Yi,WANG Yong,YANG Tong.Vanishing viscosity of isentropic Navier-Stokes equations for interacting shocks[J].Science China Mathematics,2015,58(4):653-672. 被引量：6
10Li Yinong Zheng Ling Chen BingkuiState Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, ChinaWen BangchunNortheastern University.EXPERIMENTAL RESEARCH ON EVALUATING STRUCTURE DAMAGE WITH PIEZOELECTRIC DYNAMIC IMPEDANCE[J].Chinese Journal of Mechanical Engineering,2002,15(3):204-208. 被引量：2

Chinese Science Bulletin

2000年第15期

浏览历史

内容加载中请稍等...