期刊文献+

STRUCTURAL CHARACTERIZATION OF POLYETHYLENES BY DSC ANALYSIS AFTER CRYSTALLIZATION SEGREGATION

STRUCTURAL CHARACTERIZATION OF POLYETHYLENES BY DSC ANALYSIS AFTER CRYSTALLIZATION SEGREGATION
下载PDF
导出
摘要 The molecular structure of polyethylene (PE) samples with various comonomers including propylene, I-butane and 1-hexene was investigated by DSC and C-13-NMR techniques. The density of the samples varies from 0.948 g/cm(3) to 0.917 g/cm(3), and the molecular weight determined by the GPC method is in the range of 1 similar to2 x 10(5). The branch paint content of the samples was determined by C-13-NMR measurements and was found to be less than 20 per 1000 C atoms along the main chain. Crystallization segregation DSC technique (CSDSC) was used to characterize the branch point distribution or the segment length distribution of PEs. The crystallization segregation was performed in a successive annealing process at decreasing temperatures. The interval of two successive annealing temperatures was 6 K, and the time length of each annealing step was 2.5 h. The CSDSC results clearly indicate that all the PE samples used, including some metallocene PEs, more or less exhibit their non-uniformity in segment length distribution, and bimodal or multimodal CSDSC curves were usually observed. For quantitative characterization of the CSDSC curves and the segment length distribution two parameters, the average melting point, T-mAV, and the root-mean-square deviation of melting temperature, (DeltaT(m)(AV)(2))(1/2), were proposed. TmAV is corresponding to the average segment length due to branching and (DeltaT(m)(AV)(2))(1/2) gives information about the: width of the segment length distribution. Experimental results show that both the degree of average melting temperature depression and the width of the distribution seem to increase with increasing the branching content and are dependent on the type of comonomers. Very good reproducibility and additivity of the CSDSC method were evidenced experimentally. It was concluded that the CSDSC technique is a sensitive and convenient method for characterizing the segment length distribution of branched polyethylenes and will be of great interest in structure-property relationship studies of crystalline polymers. The molecular structure of polyethylene (PE) samples with various comonomers including propylene, I-butane and 1-hexene was investigated by DSC and C-13-NMR techniques. The density of the samples varies from 0.948 g/cm(3) to 0.917 g/cm(3), and the molecular weight determined by the GPC method is in the range of 1 similar to2 x 10(5). The branch paint content of the samples was determined by C-13-NMR measurements and was found to be less than 20 per 1000 C atoms along the main chain. Crystallization segregation DSC technique (CSDSC) was used to characterize the branch point distribution or the segment length distribution of PEs. The crystallization segregation was performed in a successive annealing process at decreasing temperatures. The interval of two successive annealing temperatures was 6 K, and the time length of each annealing step was 2.5 h. The CSDSC results clearly indicate that all the PE samples used, including some metallocene PEs, more or less exhibit their non-uniformity in segment length distribution, and bimodal or multimodal CSDSC curves were usually observed. For quantitative characterization of the CSDSC curves and the segment length distribution two parameters, the average melting point, T-mAV, and the root-mean-square deviation of melting temperature, (DeltaT(m)(AV)(2))(1/2), were proposed. TmAV is corresponding to the average segment length due to branching and (DeltaT(m)(AV)(2))(1/2) gives information about the: width of the segment length distribution. Experimental results show that both the degree of average melting temperature depression and the width of the distribution seem to increase with increasing the branching content and are dependent on the type of comonomers. Very good reproducibility and additivity of the CSDSC method were evidenced experimentally. It was concluded that the CSDSC technique is a sensitive and convenient method for characterizing the segment length distribution of branched polyethylenes and will be of great interest in structure-property relationship studies of crystalline polymers.
作者 徐懋
出处 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2000年第6期557-564,共8页 高分子科学(英文版)
基金 This work was supported by the Science Foundation of Polymer Physics Laboratory, Chinese Academy of Sciences.
关键词 POLYETHYLENE branch point distribution segment length distribution crystallization segregation DSC polyethylene branch point distribution segment length distribution crystallization segregation DSC
  • 相关文献

参考文献6

  • 1Wild,L. and Chang,S.Shankernarayanan, M.J[].Polymer Preprints.1990
  • 2Wild,L. Advances in Polymer Science . 1991
  • 3Hosoda. S. Polymer Journal . 1988
  • 4Mara,J. J. and Menard,K. P. Acta Polymerica . 1994
  • 5Starck,P. Polymer International . 1996
  • 6Karoglanian,S. A. and Hassison,I. R.Thermochim[].Acta.1992

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部