期刊文献+

SILYLATION OF CELLULOSE WITH TRICHLOROSILANE AND TRIETHOXYSILANE IN HOMOGENEOUS LiCl/N,N-DIMETHYLACETAMIDE SOLUTION

SILYLATION OF CELLULOSE WITH TRICHLOROSILANE AND TRIETHOXYSILANE IN HOMOGENEOUS LiCl/N,N-DIMETHYLACETAMIDE SOLUTION
下载PDF
导出
摘要 Silyl celluloses (SiC) were prepared by reacting cellulose with chloropropyltrichlorosilane (CPTCSi) and chloropropyltriethoxysilane (CPTESi) in LiCl/N,N-dimethylacetamide (DMAc). The Si content in the silyl cellulose could be controlled by adjustment of the molar ratio of silane and cellulose. FT-IR spectra showed that cellulose was readily reacted with the above two silane reagents, and the reactivity of CPTCSi is higher than that of CPTESi. It was presumed that the reaction process belongs to graft-polymerization. The results of differential thermal analysis (DTA) indicated that the thermostability of the materials produced increased with the increase of Si content in the sample. The acid resistance of the samples SiC in 1 mol/L HCl aqueous solution was improved significantly. When Si content was ca. 20%, the silyl cellulose has excellent thermostability, hydrophobicity, low density and stability in 1 mol/L HCl aqueous solution, owing to crosslinking of cellulose chain with silane. Silyl celluloses (SiC) were prepared by reacting cellulose with chloropropyltrichlorosilane (CPTCSi) and chloropropyltriethoxysilane (CPTESi) in LiCl/N,N-dimethylacetamide (DMAc). The Si content in the silyl cellulose could be controlled by adjustment of the molar ratio of silane and cellulose. FT-IR spectra showed that cellulose was readily reacted with the above two silane reagents, and the reactivity of CPTCSi is higher than that of CPTESi. It was presumed that the reaction process belongs to graft-polymerization. The results of differential thermal analysis (DTA) indicated that the thermostability of the materials produced increased with the increase of Si content in the sample. The acid resistance of the samples SiC in 1 mol/L HCl aqueous solution was improved significantly. When Si content was ca. 20%, the silyl cellulose has excellent thermostability, hydrophobicity, low density and stability in 1 mol/L HCl aqueous solution, owing to crosslinking of cellulose chain with silane.
出处 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2000年第2期161-168,共8页 高分子科学(英文版)
基金 This work was supported by the National Natural Science Foundation of China (59773026 and 59933070).
关键词 sily cellulose chloropropyltrichlorosilane chloropropyltriethoxysilane LiCl/DMAc thermostability CROSSLINKING sily cellulose chloropropyltrichlorosilane chloropropyltriethoxysilane LiCl/DMAc thermostability crosslinking
  • 相关文献

参考文献7

  • 1Chang,Y. and Frank,C. Langmuir . 1996
  • 2Mormann,W. and Wagner,T.Macromol[].The Journal of Chemical Physics.1996
  • 3Yang,G. and Zhang,L. J. Membrane Science and Technology . 1996
  • 4Masson,J. and Manley,R. Macromolecules . 1991
  • 5Tsukruk,V. and Bliznyuk,V. Langmuir . 1998
  • 6Zhang,L. and Yang,G. J. Membrane Science and Technology . 1995
  • 7Stein,A. and Klemm,D.Makromol.Chem[].Rapid Communications in Mass Spectrometry.1988

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部