摘要
In this paper,what causes the setting-on place of woven fabrics without adopting tension compensation is explained by means of experimental methods.Owing to that the main shaft speed and the beating speed of reed can not attain the normal values at setting-on,the warp tension and the beating force of the reed can neither reach the normal level.Therefore,the relative slippage movement of the weft against the warp during beating will be less,while the common movement of the weft together with the warp will be bigger than those at nor-mal running.As a result,the setting-on place is
In this paper, what causes the setting - on place of woven fabrics without adopting tension compensation is explained by means of experimental methods. Owing to that the main shaft speed and the beating speed of reed can not attain the normal values at setting - on, the warp tension and the beating force of the reed can neither reach the normal level. Therefore, the relative slippage movement of the weft against the warp during beat-Ing will be less, while the common movement of the weft together with the warp will be bigger than those at normal running. As a result, the setting - on place is then caused by the normal density not being obtainable in the woven fabrics. Meanwhile, some remarks on the previous explanations about the woven fabric setting - on place are also commented in the paper.
