Influence of high energy ball milling on Al-30Si powder and ceramic particulate 被引量：12

Influence of high energy ball milling on Al-30Si powder and ceramic particulate

下载PDF

导出

摘要 The influence of high energy ball milling on Al 30Si powder and ceramic particulate SiC was studied by means of SEM, XRD and DSC. The results show that Al 30Si powder and their microstructure are obviously refined after high energy ball milling process. The alloy powder and SiC p stick closely to each other without interfacial reaction. DSC results detect no reaction but relaxation of the samples. So high energy ball milling can be used as an effective method for ceramic particulate pre treatment in the fabrication of MMC. The influence of high-energy ball milling on Al-30Si powder and ceramic particulate SiC was studied by means of SEM, XRD and DSC. The results show that Al-30Si powder and their microstructure are obviously refined after high-energy ball milling process. The alloy powder and SC, stick closely to each other without interfacial reaction. DSC results detect no reaction but relaxation of the samples. So high-energy ball milling can be used as an effective method for ceramic particulate pre-treatment in the fabrication of MMC.

作者 LI Yuan yuan(李元元) ZHANG Da tong(张大童) XIAO Zhi yu(肖志宇)

机构地区 S China Univ Technol

出处《中国有色金属学会会刊：英文版》 CSCD 2000年第3期324-327,共4页 Transactions of Nonferrous Metals Society of China

关键词 HIGH ENERGY ball MILLING interfaces Al 30Si POWDERS CERAMIC POWDERS high-energy ball milling interfaces Al-30Si powders ceramic powders

分类号 TF122 [冶金工程—粉末冶金]

引文网络
相关文献

参考文献1

1李元元,张大童,夏伟,张文,温利平.高压水雾化法制备的高硅铝合金粉末特性[J].金属学报,1998,34(1):95-99. 被引量：14

二级参考文献5

1邱光汉，中南工业大学学报，1995年，25卷，484页
2李月珠，快速凝固技术和材料，1993年，122页
3Zhou J，J Mater Sci，1991年，26卷，3041页
4Zhou J，J Mater Sci，1990年，25卷，4541页
5唐华生.急冷凝固铝合金的技术关键及效果[J].金属材料研究,1991,17(1):45-48. 被引量：1

共引文献13

1李素萍,毛协民,梁红玉,胡志恒.快速凝固雾化工艺对铝合金粉末形貌和粒度分布的影响[J].铸造技术,2005,26(4):264-267. 被引量：6
2王少卿,于化顺,王海涛,张振亚,闵光辉.气体雾化Al-Zn-Mg-Cu铝合金粉末的形貌及组织性能研究[J].粉末冶金技术,2010,28(1):12-15. 被引量：3
3王宇鑫,严鹏飞,严彪.过共晶铝硅合金的制备与性能研究[J].金属功能材料,2010,17(6):14-16. 被引量：5
4谢壮德,沈平,董寅生,周彼德,李庆春.快速凝固铝硅合金材料及其在汽车中的应用[J].材料科学与工程,1999,17(4):101-104. 被引量：27
5张大童,李元元,周照耀,张文.快速凝固/粉末冶金(RS/PM)高硅铝合金材料的研究[J].材料科学与工艺,1999,7(S1):41-44. 被引量：12
6谢壮德,沈军,董寅生,周彼德,李庆春.快速凝固铝硅合金的制备、组织特征及断裂行为[J].粉末冶金技术,2000,18(2):111-116. 被引量：18
7柏海明,聂敏,朱小辉,许佳辉.粉末形貌及粒度对铁硅磁粉心性能的影响[J].磁性材料及器件,2012,43(6):42-45. 被引量：7
8解立川,彭超群,王日初,蔡志勇.快速凝固过共晶铝硅合金粉末的形貌与显微组织[J].中国有色金属学报,2014,24(1):130-136. 被引量：8
9付军华,张少明,徐骏,赵新明,盛艳伟.Si含量对超音速气雾化Al-Si合金粉末性能的影响[J].粉末冶金工业,2014,24(5):12-18.
10邬小萍,聂俊辉.快速凝固高硅铝合金加热过程中的组织转变[J].金属热处理,2020,45(5):45-50. 被引量：3

同被引文献28

1李小强,胡连喜,王尔德.机械球磨Ti_(50)Al_(50)复合粉的压制特性[J].中国有色金属学报,2001,11(z1):44-47. 被引量：1
2曹顺华,高海燕,曲选辉.用作温压基粉原料的Fe-Ni-Mo合金钢粉温压与烧结行为研究[J].粉末冶金材料科学与工程,2001,6(2):128-133. 被引量：6
3周照耀,赵伟斌,陈普庆,陈维平,邵明,王郡文.Simulation of die wall friction's effect on density distribution in metallic powder compaction[J].中国有色金属学会会刊：英文版,2002,12(5):890-893. 被引量：1
4孙前江,王高潮.减小镦粗鼓形的措施及有限元模拟分析[J].南昌航空工业学院学报,2004,18(1):34-38. 被引量：6
5周明智,李萍,薛克敏.粉末烧结体镦粗成形过程热力耦合有限元分析[J].塑性工程学报,2005,12(6):11-16. 被引量：10
6REDANZ P.Numerical modeling of the powder compaction of a cup[].European Journal of Mechanics A Solids.1999
7KIM H S,LEE D N.Power-law creep model for densification of powder compacts[].Materials Science Engineering A Structural Materials Properties Microstructure and Processing.1999
8KUHN H A,DOWNEY C L.Deformation characteristics and plasticity theory of sintered powder materials[].International Journal of Powder Metallurgy.1971
9NGAI T L,CHEN W P,XIAO Z Y.Die wall lubricated warm compaction of iron-based powder metallurgy material[].Transactions of Nonferrous Metals Society of China.2002
10SHIMA S,OYANE M.Plasticity theory for porous metallurgy[].International Journal of Mechanical Sciences.1976

引证文献12

1周照耀,赵伟斌,陈普庆,陈维平,邵明,王郡文.Simulation of die wall friction's effect on density distribution in metallic powder compaction[J].中国有色金属学会会刊：英文版,2002,12(5):890-893. 被引量：1
2吴怡芳,冯勇,胡锐,闫果,许红亮,卢亚峰.高能球磨Mg／B复合粉末的特性[J].材料导报,2005,19(F05):299-301. 被引量：1
3周照耀,赵伟斌,李元元,陈普庆,倪东惠,陈维平.Numerical simulation of warm compacted synchronous pulley[J].中国有色金属学会会刊：英文版,2006,16(1):65-70.
4李元元,赵伟斌,周照耀,陈普庆.Coupled mechanical and thermal simulation of warm compaction[J].中国有色金属学会会刊：英文版,2006,16(2):311-315. 被引量：2
5李小强,屈盛官,张忠荣,邵明,李元元.高能球磨Ti/Al复合粉固相反应烧结工艺[J].华南理工大学学报（自然科学版）,2007,35(12):71-75.
6梅升,李勇.多孔材料不同孔隙百分比对压制变形规律的研究[J].热加工工艺,2012,41(20):26-29.
7雷长安.多孔材料不同孔隙比对致密度影响的研究[J].热加工工艺,2013,42(4):66-69.
8郭鲤,蔡晓兰,易峰,周蕾.成型压力对Ti-48at%Al材料致密度和硬度的影响[J].热加工工艺,2014,43(14):36-38. 被引量：3
9李小强,胡连喜,王尔德,贺文雄,刘祖岩.Microstructure of TiAl alloy prepared by intense plastic deformation and subsequent reaction sintering[J].中国有色金属学会会刊：英文版,2002,12(4):621-624. 被引量：2
10李元元,肖志瑜,倪东惠,周照耀,邵明.Warm compacted NbC particulate reinforced iron-base composite(Ⅰ)--Effect of fabrication parameters[J].中国有色金属学会会刊：英文版,2002,12(4):659-663. 被引量：5

二级引证文献16

1李金花,倪东惠,朱权利,张文,邵明.粉末冶金温压工艺制备Fe-Cu-C材料[J].机械工程材料,2005,29(5):38-40. 被引量：3
2韩立发,屈盛官,夏伟.滚挤压加工对颗粒增强铁基复合材料表面硬度的影响[J].现代制造工程,2007(1):7-8.
3韩立发,屈盛官,夏伟.滚挤压加工对颗粒增强金属基复合材料表面粗糙度的影响[J].机床与液压,2007,35(6):19-21. 被引量：6
4禹争光,马衍伟,王栋樑,张现平,高召顺,K.Watanabe,黄伟文.高性能MgB_2长线材制备及性能表征[J].物理学报,2007,56(11):6680-6684. 被引量：3
5王星云,王平,车晓舟,吴苑标.烧结参数对粉末冶金Cr13型不锈钢性能的影响[J].热加工工艺,2009,38(12):64-66. 被引量：2
6李小强,辛红伟,胡可,李元元.Microstructure and properties of ultra-fine tungsten heavy alloys prepared by mechanical alloying and electric current activated sintering[J].Transactions of Nonferrous Metals Society of China,2010,20(3):443-449. 被引量：10
7宋毅,李元元,周照耀,郑振兴,陈普庆.Improved model and 3D simulation of densification process for iron powder[J].Transactions of Nonferrous Metals Society of China,2010,20(8):1470-1475. 被引量：4
8李元元,肖志瑜,刘允中,李小强,杨超.粉末短流程成形固结技术的研究及展望[J].中国材料进展,2011,30(7):1-9. 被引量：4
9郭彪,葛昌纯,颜永年,张随财,余本军.压制工艺及压坯高径比对金属粉末致密化成形影响的模拟[J].热加工工艺,2012,41(18):64-68. 被引量：7
10李小强,赖燕根,陈健.机械合金化与放电等离子烧结制备WC颗粒增强Fe基合金的组织与力学性能[J].粉末冶金材料科学与工程,2012,17(5):599-603. 被引量：11

1Chen Jianxun, Zhao Ruirong and Jiang HanyingInstitute of Metallurgy Physical Chemistry and New Chemical Materials,Central South University of Technology, Changsha 410083, P. R. China.PREPARATION OF ZnO CERAMIC POWDER BY SOL-GEL METHOD AND ITS VOLTAGE SENSITIVE PROPERTIES[J].中国有色金属学会会刊：英文版,1998,8(2):149-153. 被引量：1
2倪增磊,王爱琴,谢敬佩,方明,张利军.碳化硅体积分数对SiCp/Al-30Si复合材料组织与性能的影响[J].粉末冶金材料科学与工程,2013,18(1):78-82. 被引量：11
3Gihad Mohamad,Eduardo Rizzatti,Humberto Roman,Gerson M. S. Alva,Andre Lubeck.Numerical Analysis of the Influence of Geometry of Ceramic Units （Blocks） on Structural Walls[J].Journal of Civil Engineering and Architecture,2016,10(1):44-52.
4顾冬冬,沈以赴,代鹏,杨明川.Microstructure and property of sub-micro WC-10 %Co particulate reinforced Cu matrix composites prepared by selective laser sintering[J].中国有色金属学会会刊：英文版,2006,16(2):357-362. 被引量：5
5田忠良,赖延清,李劼,张刚,刘业翔.Electrical resistivity of NiFe_2O_4 ceramic and NiFe_2O_4 based cermets[J].中国有色金属学会会刊：英文版,2004,14(3):421-425.
6周飞,李志章,罗启富.Bonding of Silicon Nitride Ceramic Composite with RE_2O_3Al_2O_3SiO_2 Glass Solders[J].Journal of Rare Earths,1999,17(3):194-199.
7李元元,肖志瑜,倪东惠,周照耀,邵明.Warm compacted NbC particulate reinforced iron-base composite(Ⅰ)--Effect of fabrication parameters[J].中国有色金属学会会刊：英文版,2002,12(4):659-663. 被引量：5
8刘东华,刘咏,赵大鹏,王岩,方京华,温玉仁,刘祖铭.Effect of ball milling time on microstructures and mechanical properties of mechanically-alloyed iron-based materials[J].Transactions of Nonferrous Metals Society of China,2010,20(5):831-838. 被引量：1
9刘平安,曾令可,李秀艳.Sintering products molded by injecting ceramic and metal powders[J].Journal of Central South University of Technology,2005,12(3):269-271.
10张纯亮.金属注射成形汽车零件的应用[J].河南科技,2010,29(11):60-61. 被引量：3

中国有色金属学会会刊：英文版

2000年第3期

浏览历史

内容加载中请稍等...