期刊文献+

Structure Evolution of Bulk Metallic Glass Zr_(52.5)Ni_(14.6)Al_10Cu_(17.9)Ti_5 during Annealing 被引量:1

Structure Evolution of Bulk Metallic Glass Zr_(52.5)Ni_(14.6)Al_10Cu_(17.9)Ti_5 during Annealing
下载PDF
导出
摘要 Bulk metallic glass Zr_52.5Ni_14.6Al_10Cu_17.9Ti_5 was prepared by melt injection casting method. Its glass transition and crystallization temperatures were determined by differential scanning calorimetry (DSC) to be 631 K and 710 K respectively. By analysis of X-ray diffractometry (XRD) and transmission electron microscopy (TEM ), the predominant crystallized phase of Zr_2Ni0.67O0.33 distributed on glass state matrix was detected after annealing at 673 K for 600 s. The transformation to Zr_2Ni_0.67O_0.33 and a small amount of ZrAl and Zr_2Cu took place after annealing for 600 s at temperature from 703 K to 723 K. With increasing annealing temperature from 753 K to 823 K, the amounts of ZrAl and Zr_2Cu increased, but the size of the crystals did not significantly change. The transformation to Zr_2Ni_0.67O_0.33 is interface-controlled, but is diffusion-controlled to Zr_2Cu and ZrAl. With increasing annealing temperature up to 200 K above T_x, the nanometer grains became very fine because of the increase of nucleation rate for Zr_2Cu and ZrAl. Bulk metallic glass Zr_52.5Ni_14.6Al_10Cu_17.9Ti_5 was prepared by melt injection casting method. Its glass transition and crystallization temperatures were determined by differential scanning calorimetry (DSC) to be 631 K and 710 K respectively. By analysis of X-ray diffractometry (XRD) and transmission electron microscopy (TEM ), the predominant crystallized phase of Zr_2Ni0.67O0.33 distributed on glass state matrix was detected after annealing at 673 K for 600 s. The transformation to Zr_2Ni_0.67O_0.33 and a small amount of ZrAl and Zr_2Cu took place after annealing for 600 s at temperature from 703 K to 723 K. With increasing annealing temperature from 753 K to 823 K, the amounts of ZrAl and Zr_2Cu increased, but the size of the crystals did not significantly change. The transformation to Zr_2Ni_0.67O_0.33 is interface-controlled, but is diffusion-controlled to Zr_2Cu and ZrAl. With increasing annealing temperature up to 200 K above T_x, the nanometer grains became very fine because of the increase of nucleation rate for Zr_2Cu and ZrAl.
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2000年第4期357-361,共5页 材料科学技术(英文版)
  • 相关文献

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部