方丝弓矫治技术方形弓丝使用中的一些问题
被引量:3
摘要
方丝弓矫治技术方形弓丝使用中的一些问题曾祥龙在方形(矩形)弓丝上弯制第三序列弯曲产生转矩力,对切牙进行唇舌向控根,是方丝弓矫治器的独特作用'''。方形弓丝可以在第二阶段关闭前牙间隙时使用,在第三阶段治疗中更作为常规弓丝。转矩力曾一度被视为一种"危险而...
出处
《中华口腔正畸学杂志》
1994年第1期47-50,共4页
Chinese Journal of Orthodontics
同被引文献31
-
1石勰,张端强,许潾于,钟萍萍,严宏,陈日齐.摇椅弓角度和弧形深度对牙齿垂直向受力的影响[J].实用口腔医学杂志,2007,23(2):183-186. 被引量:12
-
2刘怡,孙志辉,郑刚.多种镍钛弓丝应力应变的研究[J].口腔正畸学,2007,14(2):56-59. 被引量:5
-
3Bednar JR, Gruendem an GW, Sand rik JL. A comparative study of frictional forces between orthodontic brackets and arch wires [J]. Am J Orthod Dentofacial Orthop, 1991,100 (6) : 513-522.
-
4Kim T,Suh J,Kim N. Optimum conditions for parallel translation of maxillary anterior teeth under retraction force determined with the finite element method[J].American Journal of Orthodontics and Dentofacial Orthopedics,2010,(05):639-647.
-
5Sung SJ,Jang GW,Chun YS. Effective en-masse retraction design with orthodontic mini-implant anchorage:A finite element analysis[J].American Journal of Orthodontics and Dentofacial Orthopedics,2010,(05):648-657.
-
6Tominaga JY,Tanaka M,Koga Y. Optimal loading conditions for controlled movement of anterior teeth in sliding mechanics[J].Angle Orthodontist,2009,(06):1102-1107.
-
7Proffit WR,Fields HW. Contemporary orthodontics[M].St Louis:Mosby,2000.326-361.
-
8Sifakakis I,Pandis N,Makou M,et at. A comparative assessment of the forces and moments generated with various maxillary incisor intrusion biomechanics[J].European Journal of Orthodontics,2010,(02):159-164.
-
9Kojima Y,Fukui H. Numeric simulations of en-masse space closure with sliding mechanics[J].American Journal of Orthodontics and Dentofacial Orthopedics,2010,(06):702e1-702e6.
-
10Chen G,Schmutz B,Epari D. A new approach for assigning bone material properties from CT images into finite element models[J].Journal of Biomechanics,2010,(05):1011-1015.
引证文献3
-
1杜汉斌,胡荣党.方形弓丝尺寸精度、表面粗糙度及拐角处弧度比较[J].临床口腔医学杂志,2009,25(3):142-144. 被引量:2
-
2安晓莉,陈宏伟,司庆宗,周又和,刘斌,王记增.摇椅弓滑动法整体内收上颌前牙的三维有限元分析[J].华西口腔医学杂志,2013,32(1):21-25. 被引量:15
-
3李永刚,金晶,孙婧婧,王为,冯雪.双钥匙曲整体内收上前牙的三维有限元研究[J].实用口腔医学杂志,2016,32(3):362-367. 被引量:4
二级引证文献20
-
1祖青,米丛波.正畸治疗中转矩表达的研究进展[J].中华口腔医学研究杂志(电子版),2010,4(5):59-62. 被引量:5
-
2彭惠,张莹,王宏艳.上颌第一磨牙弯曲牙根生物组织应力的三维有限元分析[J].中国组织工程研究,2013,17(33):5949-5956.
-
3李振强,安阳.镍钛摇椅弓形丝对前磨牙区应力大小的研究[J].中国药物与临床,2014,14(1):34-36. 被引量:3
-
4陈奇,麦志辉,陈正,陈琳,艾虹.双钥匙曲应用于上颌骨性前突病例初探[J].中华口腔医学研究杂志(电子版),2014,8(2):48-50. 被引量:4
-
5艾杰,徐宇红.滑动法结合微种植体内收前牙的相关性研究进展[J].现代医药卫生,2015,31(2):224-226.
-
6林斌,梁甲兴,林立,张玉华,李多.个别牙齿控根辅弓的临床应用[J].国际口腔医学杂志,2014,41(6):643-646.
-
7吴剑,敬蒸,赵立星.上颌前牙阻抗中心的研究进展[J].北京口腔医学,2015,23(1):53-56. 被引量:3
-
8何淞,王亚楠,瞿杨,杨四维,黄跃.种植体支抗关闭拔牙间隙磨牙位移趋势的有限元研究[J].重庆医学,2016,45(14):1886-1888. 被引量:2
-
9李永刚,金晶,孙婧婧,王为,冯雪.双钥匙曲整体内收上前牙的三维有限元研究[J].实用口腔医学杂志,2016,32(3):362-367. 被引量:4
-
10彭秋萍,郑光华,伍军.热处理对不同深度不锈钢摇椅弓加、卸载力影响的实验研究[J].南昌大学学报(医学版),2017,57(1):40-42. 被引量:1
-
1卢海平.转矩力及其在方丝弓矫治技术中的应用[J].口腔医学纵横,1994,10(2):120-122. 被引量:2
-
2刘月华,傅民魁,曾祥龙.直丝弓矫治技术系列讲座(四)(第二阶段:覆盖与磨牙关系矫正)[J].中华口腔正畸学杂志,1996,12(4):180-183. 被引量:2
-
3王丽艳,林珠,施亮,刘艳,张娟.切牙转矩对上颌骨性前突患者颌骨和软组织侧貌的影响[J].临床口腔医学杂志,2012,28(7):420-422. 被引量:5
-
4徐鸿骏,黄良平.单个牙控根辅簧矫治尖牙长轴内倾[J].实用口腔医学杂志,2002,18(4):370-371.
-
5王力.龈向移槽法在舌向错位前牙快速控根中的应用[J].中国煤炭工业医学杂志,2003,6(9):796-796.
-
6孔凡芝,王林,沈蕴华,马俊青.双期矫治较大年龄骨性Ⅲ类错的硬组织变化[J].江苏大学学报(医学版),2003,13(6):479-481. 被引量:3
-
7郑改莲,艾莉.J钩在治疗安氏Ⅱ~1错畸形中的临床应用[J].临床口腔医学杂志,2011,27(1):42-43. 被引量:2
-
8曾祥龙,傅民魁.方丝弓矫治技术拔牙病例第二阶段治疗中的支抗问题[J].口腔医学纵横,1993,9(1):52-54. 被引量:4
-
9仇金泉,徐平平,李容.超声洁治术治疗近中阻生下颌第三磨牙急性冠周炎的体会[J].广东牙病防治,2006,14(3):223-224.
-
10徐璐璐,段银钟,金作林,徐娟.改良式压膜保持器与Hawley保持器在下颌后缩患者保持疗效的比较研究[J].中华口腔正畸学杂志,2010,17(2):81-84. 被引量:3