摘要
The use of non-power frequency components for protection measurements in an area that has received relatively little attention. Although work on the use of switched stack tuners has been reported for fault detection, the sensitivity of switched arrangements is limited by scnsitivity of directional detectors for switching purposes. This paper presents an alternative non-switching scheme which is relatively simple.A simplified typical 400kV system with the line trap, stack tuner, coupling capacitor and bus capacitance to earth is considered. Fault studies by using the EMTP have been carried out, frequency-dependent pararnctcrs are used for the line representation. Arcing faults have also bccn investigated and the results show a great promise of the scheme.
The use of non-power frequency components for protection measurements in an area that has received relatively little attention. Although work on the use of switched stack tuners has been reported for fault detection, the sensitivity of switched arrangements is limited by scnsitivity of directional detectors for switching purposes. This paper presents an alternative non-switching scheme which is relatively simple.A simplified typical 400kV system with the line trap, stack tuner, coupling capacitor and bus capacitance to earth is considered. Fault studies by using the EMTP have been carried out, frequency-dependent pararnctcrs are used for the line representation. Arcing faults have also bccn investigated and the results show a great promise of the scheme.
出处
《电力系统及其自动化学报》
CSCD
1993年第1期1-9,共9页
Proceedings of the CSU-EPSA