期刊文献+

聚乳酸微球的制备 被引量:2

Preparation of polylactic acid microspheres
下载PDF
导出
摘要 以L-乳酸为原料,锡粒为催化剂,实现了丙交酯的开环聚合反应,红外光谱结果表明,合成了分子量可控的聚乳酸。以二氯甲烷为溶剂,聚乙烯醇为表面活性剂,制备了聚乳酸微球,研究了聚乙烯醇浓度对聚乳酸微球的影响。结果表明,当聚乙烯醇浓度增加时,微球半径变小,但粒径分布均匀度下降,聚乙烯醇浓度为1%时,聚乳酸成球效果较好。 Using L-lactic acid as raw materials and tin as a catalyst,and through the activity of lactide ring-opening polymerization,the controlled molecular weight polylactic acid was synthesized.FTIR results showed that controlled molecular weight polylactic acid was synthesized.Using dichloromethane as solvent,polyvinyl alcohol as surfactant,polylactic acid microspheres were prepared.Effect of PVA concentration on the polylactic acid microspheres was researched.Results showed that when the PVA concentration increased,the microspheres became smaller,but the particle size distribution decreased.Concentration of PVA was 1%,polylactic acid into the ball was better.
出处 《应用化工》 CAS CSCD 2011年第11期1945-1947,共3页 Applied Chemical Industry
基金 河南省2011年度科技攻关重点项目(112102310562) 河南省教育厅2011年度自然科学研究项目(2011B150043) 周口师范学院2011年度实验室开放项目(201107)
关键词 丙交酯 聚乳酸 微球 lactide polylactic acid microspheres
  • 相关文献

参考文献3

二级参考文献20

  • 1何永言,夏淑贞,吴蒙,王海龙.医用聚乳酸的合成及其管型材料性能的测定[J].高分子材料科学与工程,1993,9(2):24-28. 被引量:17
  • 2常青.聚乳酸的合成、结构及性能[J].高分子材料科学与工程,1994,10(1):140-143. 被引量:29
  • 3[2]Qiu H J,Rieger J,Gilbert B,et al.PLA-coated gold nanoparticles for the labeling of PLA biocarriers[J].Chem Mater,2004,16(5):850-856.
  • 4[3]Moe K S,Weisman R A.Resorbable fixation in facial plastic and head and neck reconatructive surgery:an initial report on polylactic acid implants[J].Laryngoscope,2001,111(10):1697-1701.
  • 5[6]Ajioka M,Enomoto K,Suzuki K,et al.Basic properties of polylactic acid produced by the direct condensation polymerization of lactic acid[J].Bull Chem Soc Jpn,1995,68(8):2125-2131.
  • 6[7]Moon S I,Lee C W,Taniguchi I,et al.Melt/solid polycondensation of l-lactic acid:an alternative route to poly(L-lactic acid) with high molecular weight[J].Polymer,2001,42(11):5059-5062.
  • 7[8]Kulkarni R K,Moore E G,Hegyeli A F,et al.Biodegradable poly(lactic acid) polymers[J].J Biomed Mater Res,1971,5(3):169-181.
  • 8[9]Kricheldorf H R.Syntheses and application of polylactides[J].Chemophere,2001,43(1):49-54.
  • 9Langer R,Vacanti J P.Tissue engineering[J].Science,1993,260:920-924.
  • 10Kulkarni R K,Pani K C,Neuman C.Polylactide acid for surgical implants[J].Arch Surg,1966,93:839-848.

共引文献16

同被引文献25

  • 1张雯,张兴祥.青风藤总生物碱聚乳酸微球的制备[J].中国医药工业杂志,2011,42(5):354-357. 被引量:3
  • 2于基志,张白晶,蒋雪涛.高乌甲素的临床应用[J].第二军医大学学报,2005,26(7):822-824. 被引量:44
  • 3孙家英,张立武,梅虎,梁桂兆,周原.星形聚合物的研究与应用进展[J].化工进展,2006,25(3):281-285. 被引量:19
  • 4Nahar M, JaJn N K. Preparation,characterization and evaluation of targeting potential of amphotericin bloaded engineered PLGA nanoparticles [ J ]. Pharm Res ,2009,26:2588 - 2598.
  • 5Allison S D. Effect of structural relaxation on the preparation and drag release behavior of poly( lacticco-glycolic) acid microparticle drug delivery systems [J]. J Pharm Sci,2008,97:2022-2035.
  • 6AMERI A. The effects of aconitum alkaloids on the central nerv- ous system [ J ]. Prog Neurobiol, 1998, 56 ( 2 ) :211-235.
  • 7XIN R H, CHENG F S, HU Z Y, et al. Research situation of 1appaconitine[J].中兽医医药杂志,2009,28(2):74-76.
  • 8AYEN W Y, KUMAR N. A systematic study on lyophilization process of polymersomes for long-term storage using doxorubicin- loaded (PEG) 3 -PLA nanopolymersomes [ J ]. Eur J Pharm Sci, 2012, 46(5) :405-414.
  • 9ESSA S, RABANEL J M, HILDGEN P. Effect of polyethylene glycol (PEG) chain organization on the physicochemical proper- ties of poly ( d, 1-lactide) (PLA) based nanoparticles[ J]. Eur J Pharm Biopharm, 2010, 75 (2) :96-106.
  • 10JIN H, LI S, HU D, et al. Preparation of PLA-PEG nanoparti- cles by the solution enhanced dispersion with enhanced mass transfer using ultrasound in supereritical CO2 [ J]. Powder Techn- ol,2012, 227 : 17-23.

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部