DE10电火花成型机床的电气系统改造与实现

The Electrical System Transformation and Realization of DE10 EDM Shaping Machine

通过对DE10电火花机床电气控制系统改造可行性的研究,提出采用单轴数控系统控制柜代替原有控制系统的方案,主轴电机采用T0818电机,并设计了其他部分控制电路。经安装调试,改造后机床已投入正常使用,且与原机床相比,电气系统的可靠性、可操作性、可维修性提高,系统经济灵活、性价比高。

The single axis CNC system control cabinet was presented instead of the original control system based on studying the transformation feasibility of DE10 EDM＇s electric control system. T0818 motor was adopted as the spindle motor, and other control circuits were designed. Through installing and debugging, the reformed machine is put into use. Compared with the original machine, the reliability, maintainability, operability, economic flexibility and cost performance of the. system are improved.