期刊文献+

P92耐热钢δ-铁素体含量的热力学计算与试验分析 被引量:13

Thermodynamic Calculation and Experimental Measurement of δ-Ferrite Amount in P92 Heat-Resistant Steel
原文传递
导出
摘要 采用试验方法研究了加热温度对P92钢中δ-铁素体含量的影响。试验结果表明,在900~1200℃温度范围内,随着加热温度的升高,δ-铁素体含量先减少后增多,呈U型变化,在1050℃附近δ-铁素体含量最少。采用Thermo-Calc热力学软件计算得到了P92钢的准平衡态相图,并对上述热过程进行了相计算,计算数据与试验结果吻合。随着钢中铁素体形成元素含量增多,P92钢的准平衡态相图的奥氏体区缩小,铁素体区扩大,但处于单相奥氏体区内最低碳含量对应的温度值均在1050℃附近。准平衡态相图能够较好地解释δ-铁素体含量随温度变化的规律。 The effect of processing temperature on δ-ferrite amount in P92 steel was experimentally investigated.Results show that the amount of δ-ferrite decreases firstly and then increases after approaching its lower peak around 1 050 ℃,within the temperature scope from 900 ℃ to 1 200 ℃.With the help of the Thermo-Calc software,the pseudo-equilibrium phase diagrams of P92 steel were calculated.Its prediction on δ-ferrite evolution agrees well with aforementioned measurement.These pseudo-equilibrium phase diagrams can reasonably explain the experimental results.
出处 《钢铁》 CAS CSCD 北大核心 2011年第11期89-92,共4页 Iron and Steel
基金 国家科技支撑计划(2007BAE51B02)
关键词 P92 耐热钢 Δ铁素体 Thermo-Calc计算 相图 P92 heat resistant steel δ-ferrite Thermo-Calc calculation phase diagram
  • 相关文献

参考文献5

  • 1Fujio Abe. Precipitate Design for Creep Strengthening of 9% Cr Tempered Martensitic Steel for Ultra Supcreritical Power Plants[J]. Science and Technology of Advanced Materials, 2008(9) : 1-15.
  • 2Hald J. Microstructure and Long-Term Creep Properties of 9%-12% Cr Steels [J].International Journal of Pressure Vessels and Piping, 2008, 85: 30.
  • 3Maruyama K. Kots Sawada, Koike J. Strengthening Mecha nisms of Creep Resistant Tempered Martensitic Steel [J]. IS1J International, 2001, 41(6) : 641.
  • 4AⅡ古里亚耶夫.金属学[M].赵振果,译.北京:机械工业出版社,1986.
  • 5包汉生,程世长,刘正东,谭舒平.化学成分和热处理温度对T122耐热钢中δ-铁素体含量的影响[J].钢铁,2009,44(12):74-78. 被引量:6

二级参考文献11

  • 1刘正东,程世长,包汉生,傅万堂,杨钢,王立民.钒对T122铁素体耐热钢组织和性能的影响[J].特殊钢,2006,27(1):7-10. 被引量:11
  • 2黄晓斌,罗通伟,何晓辉.汽轮机末级叶片用钢1Cr12Ni3Mo2VN的研制[J].特钢技术,2005,10(3):51-57. 被引量:13
  • 3Fujimitsu Masuyama. History of Power Plants and Progress in Heat Resistant Steels[J]. ISIJ International, 2001, 41 (6): 612.
  • 4Viswanathan R, Bakker W T. Materials for Boilers in Ultra Supercritical Power Plants[A]. Proceedings of 2000 International Joint Power Generation Conference[C]. Miami Beach, Florida:2000. 20.
  • 5徐英男.我国发电设备用钢管现状与发展[A].超超临界火电机组用钢铁材料国际研讨会’2005论文集[C].北京:2005.11.
  • 6Fujio Abe, Torsten-Ulf Kern, Viswanthan R. Creep-Resist- ant Steels[M]. Cambridge: Woodhead Publishing Limited, 2008.
  • 7Schgfer L, Schirra M. Influence of Delta Ferrite and Dendritic Carbides on the Impact and Tensile Properties of a Marten sitic Chromium Steel [J]. Journal of Nuclear Materials 1998, 258-263, Part2, (10):1336.
  • 8Gabrel J, ZakineC, LefebvreB,et al. VM12 A New 12% Cr Steel for Application at High Temperature in Advanced Power Plants Status of Development[A]. Fifth International Conference on Advances in Materials Technology for Fossil Power Plants[C]. Marco Island Marriott Resort, Marco Island, Florida: 2007.3A-05.
  • 9Knezevic V, Sauthoff G, Vick J, et al. Martensitic/Ferritic Super Heat-Resistant 650℃ Steels Design and Testing of Model Alloys[J]. ISIJ International, 2002,42(12) : 1505.
  • 10Fujimitsu Masuyama, Daikoku Takashi, Haneda Hisao, et al. High Strength High-Cr Ferritic Heat-Resistant Steel[P]. European: 0 427 301 A1, 1986-10-13.

共引文献5

同被引文献111

引证文献13

二级引证文献89

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部