摘要
探索了几种方法对生化后的丙烯酸及其酯废水深度处理的能力。Fenton法和微波辅助Fenton法对COD的去除率>85%,臭氧氧化法和铁炭微电解法对COD的去除率均<40%,过硫酸铵辅助臭氧氧化法对COD的去除率可达79%,光电催化氧化法对COD的去除率<8%。铁炭微电解法、Fenton法、微波辅助Fenton法、臭氧氧化法可使废水可生化性由0.35分别提高到0.56、0.43、0.44、0.40,光电催化氧化法使废水可生化性锐减为0.03。
The effects of several advanced treatment methods for acrylic and its ester wastewater,which was biochemically treated,has been investigated. The removing rates of COD by Fenton process and microwave-assisted Fenton process can reach above 85%. The removing rates of COD by ozone oxidation process and iron carbon microelectrolysis process are both lower than 40% ,by ammonium persulfate-assisted ozone oxidation process can reach 79%, and by photoelectro-catalytic oxidation process is less than 8%. The iron carbon micro-electrolysis, Fenton, microwave-assisted Fenton and ozone oxidation can make the biodegradability of wastewater increase from 0.35 to 0.56,0.43,0.44 and 0.40, respectively. The photoelectro-catalytic oxidation process can make the biodegradability of wastewater decline sharply to 0.03.
出处
《工业水处理》
CAS
CSCD
北大核心
2011年第12期73-76,共4页
Industrial Water Treatment
关键词
丙烯酸废水
臭氧氧化
光电催化氧化
微电解
FENTON
acrylic wastewater
ozone oxidation
photoelectro-catalytic oxidation
micro-electrolysis
Fenton