期刊文献+

贴片式 LED 的发展趋势及其应用特性研究 被引量:8

SMD LED Development Trend and Its Application Research
下载PDF
导出
摘要 贴片式发光二极管是一种新型表面贴装式半导体发光器件,贴片式封装的LED又分为CHIP、TOP、SIDEVIEW等若干种类型,贴片式LED除了有着直插式LED的所有优点外,更以体积小、散射角大、发光均匀性好,散热性好等特点被广泛的应用于各种场合,例如显示屏、信号灯、家用照明上很多都已经采用了贴片式LED。本文从多个角度切入,介绍了贴片式LED的市场状况和发展趋势,同时探究贴片式LED的封装特性及最新研究成果,分析研究贴片式LED节能灯的驱动电路技术,并且将它与直插式LED节能灯做了光电特性对比测试,使我们能更全面的掌握当今贴片式LED的发展现状。相信贴片式LED的广泛应用和飞速发展,将引领当今LED照明行业朝着更轻薄、更高效的方向发展。 SMD LED is a new surface-mount semiconductor device,and its package is divided into several types,such as CHIP,TOP and SIDEVIEW.In addition,not only with all the advantages of DIP LED,but also its small size,large scattering angle,good light uniformity,and good heat dissipation characteristics,so it is widely used in various occasions,such as display screen,signal light,home lighting have been used in SMD LED.This article is presented from several parts,introducing the SMD LED market conditions and trends,while exploring the package features of SMD LED and the latest research results,and analysis SMD LED energy saving lamp's driving circuit technology,and I make a comparison between the SMD LED and the DIP LED by photo-electricity property' test,so that we can grasp the current situation of the SMD LED development easily.I believe that the widespread of SMD LED applications and rapid development of LED lighting industry will lead the current LED lighting industry development towards lighter,more efficient.
作者 郑继雨 王伟
出处 《照明工程学报》 北大核心 2011年第6期14-17,共4页 China Illuminating Engineering Journal
关键词 LED节能灯 贴片式发光二极管 散射角 散热 驱动电路技术 energy-saving LED lamps SMD LED scattering angle heat dissipation drive circuit technology
  • 相关文献

参考文献4

  • 1Roland Haitz, Fred Kish, Jeff Tsao, Jeff Nelson. The Case for a National Research Program on Semiconductor Lighting. Page 5. (1999).
  • 2Vishay. Vishay's New Power SMD White LED [ EB/OL]. Vishay Inter-technology, Inc. 2010.
  • 3刘菁菁等.LED照明光源的封装与应用[R].华东师范大学.2009.
  • 4钟斌.LED焊接工艺探析(下)[J].现代显示,2007(3):64-68. 被引量:2

共引文献1

同被引文献50

  • 1И.Н.Быстров,谷青.内窥镜在机车机械部分和电器电机检测中的应用[J].国外内燃机车,2004(4):44-46. 被引量:1
  • 2胡以静,胡跃明,吴忻生.高速高精度贴片机的贴装效率优化方法[J].电子工艺技术,2006,27(4):191-196. 被引量:34
  • 3宋福民,肖永山.贴片机结构设计研究[J].电子工业专用设备,2007,36(8):16-20. 被引量:11
  • 4Wang L, Shen Y M. Design of Machine Vision Applications in De- tection of Defects in High--Speed Bar Copper [A]. 2010 Interna- tional Conference on E--Product, E--Service and E--Entertainment (ICEEE) [C], 2010: 7-9.
  • 5Liu S J, Wang K. Detection of Damaged Cotton seeds Using Ma- chine Vision [J]. Information Technology and Applications. 2009, 503- 506.
  • 6Jia Jiancheng. A Machine Vision Application for Industrial Assem- bly Inspection [A]. International Conference on Machine Vision [C], 2009: 172-176.
  • 7Kirn W S, Oh H J, Chung Y S, et al. The Detection of Curve--type Defects in the TFT- LCD panels with Machine Vision [C]. IEEERegionl0, 2005:1 - 5.
  • 8CarstenSteger,MarkusUlrich,ChristianWiedemann.机器视觉算法与应用[M].杨少荣,吴迪靖,段德山译.北京:清华大学出版社,2009.
  • 9Bradski.G,Kaehler.A.学习OpenCV(中文版)[M].于仕琪,刘瑞祯译.北京:清华大学出版社,2009.
  • 10童志伟,刘银,曾小慧.机械设计基础[M].武汉:中国地质大学出版社,2012:273-278.

引证文献8

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部