期刊文献+

Relation between oxidation microstructure and the maximum energy product loss of a Sm_2Co_(17) magnet oxidized at 500℃ 被引量:1

Relation between oxidation microstructure and the maximum energy product loss of a Sm_2Co_(17) magnet oxidized at 500℃
下载PDF
导出
摘要 The oxidation microstructure and maximum energy product (BH)max loss of a 8m(Co0.76, Fe0.1, Cu0.1, Zr0.04)7 magnet oxidized at 500 ℃ were systematically investigated. Three different oxidation regions were formed in the oxidized magnet: a continuous externM oxide scale, an internal reaction layer, and a diffusion zone. Both room-temperature and high-temperature (BH)max losses exhibited the same parabolic increase with oxidation time. An oxygen diffusion model was proposed to simulate the dependence of (BH)max loss on oxidation time. It is found that the external oxide scale has little effect on the (BH)max loss, and both the internal reaction layer and diffusion zone result in the (BH)max loss. Moreover, the diffusion zone leads to more (BH)max loss than the internal reaction layer. The values of the oxidation rate constant k for internal reaction layer and oxygen diffusion coefficient D for diffusion zone were obtained, which are about 1.91×10^-10 cm^2/s and 6.54×10^-11 cm^2/s, respectively. The oxidation microstructure and maximum energy product (BH)max loss of a 8m(Co0.76, Fe0.1, Cu0.1, Zr0.04)7 magnet oxidized at 500 ℃ were systematically investigated. Three different oxidation regions were formed in the oxidized magnet: a continuous externM oxide scale, an internal reaction layer, and a diffusion zone. Both room-temperature and high-temperature (BH)max losses exhibited the same parabolic increase with oxidation time. An oxygen diffusion model was proposed to simulate the dependence of (BH)max loss on oxidation time. It is found that the external oxide scale has little effect on the (BH)max loss, and both the internal reaction layer and diffusion zone result in the (BH)max loss. Moreover, the diffusion zone leads to more (BH)max loss than the internal reaction layer. The values of the oxidation rate constant k for internal reaction layer and oxygen diffusion coefficient D for diffusion zone were obtained, which are about 1.91×10^-10 cm^2/s and 6.54×10^-11 cm^2/s, respectively.
出处 《Chinese Physics B》 SCIE EI CAS CSCD 2011年第12期416-420,共5页 中国物理B(英文版)
基金 Project supported by the National High Technology Research and Development Program of China (Grant No. 2010AA03A401) the National Natural Science Foundation of China (Grant No. 51071010) the Aviation Foundation of China (AFC) (Grant No. 2009ZF51063) the Fundamental Research Funds for the Central Universities
关键词 Sm2Co17 magnet maximum energy product loss internal reaction layer diffusion zone Sm2Co17 magnet, maximum energy product loss, internal reaction layer, diffusion zone
  • 相关文献

参考文献18

  • 1Kim A S 1998 J. Appl. Phys. 83 6715.
  • 2Liu J F, Zhang Y, Dimitrov D and Hadjipanayis G C 1999 J. Appl. Phys. 85 2800.
  • 3Chen R J, Zhang H W, Rong C B, Sun J R and Shen B G 2006 d. Appl. Phys. 100 043901.
  • 4Chen C H,Walmer M S, Walmer M H, Liu S, Kuhl E and Simon G 1998 J. Appl. Phys. 83 6706.
  • 5Feng H B, Chen H S, Guo Z H, Pan W, Zhu M G and Li W 2011 J. Appl. Phys. 109 07A763.
  • 6Gutfleisch O, Mfiller K H, Khlopkov K, Wolf M, Yan A, Schafer R, Gemming T and Schultz L 2006 Acta Mater. 54 997.
  • 7Ma B M, Liang Y L and Bounds C O 1997 J. Appl. Phys 81 5612.
  • 8Guo Z H, Pan W and Li W 2006 J. Magn. Magn. Mater 303 e396.
  • 9Liu T, Guo Z H, Li X M and Li W 2009 Acta Phys. Sin 58 2030 (in Chinese).
  • 10Tang W, Zhang Y and Hadjipanayis G C 2000 J. Appl Phys. 87 399.

同被引文献29

  • 1Gutfleisch O,Willard M A,Bruck E,et al.Magnetic materials and devices for the 21st century:stronger,lighter,and more energy efficient[J].Advanced Materials,2011,23(7):821-842.
  • 2Zhang Z,Song X,Qiao Y,et al.A nanocrystalline SmCo compound for high-temperature permanent magnets[J].Nanoscale,2013,5(6):2279-2284.
  • 3Fingers R T,Rubertus C S.Application of high temperature magnetic materials[J].IEEE Transactions on Magnetics,2000,36(5):3373-3375.
  • 4Provenza A J,Montague G T,Jansen M J,et al.High temperature characterization of a radial magnetic bearing for turbomachinery[J].Journal of Engineering for Gas Turbines and Power,2005,127(2):437-444.
  • 5Gutfleisch O,Müller K H,Khlopkov K,et al.Evolution of magnetic domain structures and coercivity in high-performance SmCo 2:17-type permanent magnets[J].Acta Materialia,2006,54(4):997-1008.
  • 6Zhang Z,Song X,Xu W.Phase evolution and its effects on the magnetic performance of nanocrystalline SmCo7 alloy[J].Acta Materialia,2011,59(4):1808-1817.
  • 7Wang G J,Jiang C B.The coercivity and domain structure of Sm (Cobal Fe0.1 Cux Zr0.033)6 9(x=0.07,0.10,0.13) high temperature permanent magnets[J].Journal of Applied Physics,2012,112(3):033909.
  • 8Wang G J,Zheng L,Jiang C B.Magnetic domain structure and temperature dependence of coercivity in Sm(Cobal Fe0.1Cu0.1Zr0.033) z (z=6.8,7.4) magnets[J].Journal of Magnetism and Magnetic Materials,2013,343:173-176.
  • 9Jiang C B,Venkatesan M,Gallagher K,et al.Magnetic and structural properties of SmCo7-x Tix magnets[J].Journal of Magnetism and Magnetic Materials,2001,236:49-55.
  • 10Huang M Q,Wallace W E,McHenry M.Structure and magnetic properties of SmCo7-xZrx (x=0-0.8)[J].Journal of Applied Physics,1998,83(11):6718-6720.

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部