期刊文献+

Improvements on Calculation Model of Theoretical Combustion Temperature in a Blast Furnace 被引量:7

Improvements on Calculation Model of Theoretical Combustion Temperature in a Blast Furnace
原文传递
导出
摘要 On the basis of the existing originally modified calculation models of theoretical combustion temperature(TCT),some factors,such as the combustion ratio of pulverized coal injection(PCI),the decomposition heat of PCI and the heat consumption of SiO2 in ash reduced in high temperature environment,were amended and improved to put forward a more comprehensive model for calculating TCT.The influences of each improvement on TCT were studied and the results were analyzed compared with those of traditional model and originally modified model,which showed that the present model could reflect the thermal state of a hearth more effectively. On the basis of the existing originally modified calculation models of theoretical combustion temperature(TCT),some factors,such as the combustion ratio of pulverized coal injection(PCI),the decomposition heat of PCI and the heat consumption of SiO2 in ash reduced in high temperature environment,were amended and improved to put forward a more comprehensive model for calculating TCT.The influences of each improvement on TCT were studied and the results were analyzed compared with those of traditional model and originally modified model,which showed that the present model could reflect the thermal state of a hearth more effectively.
出处 《Journal of Iron and Steel Research(International)》 SCIE EI CAS CSCD 2011年第12期1-5,共5页 钢铁研究学报(英文版)
基金 Item Sponsored by National Natural Science Foundation of China(50974143)
关键词 blast furnace theoretical combustion temperature improved calculation model blast furnace theoretical combustion temperature improved calculation model
  • 相关文献

参考文献10

  • 1吴胜利,余晓波,陈辉,徐健,王筱留.高炉理论燃烧温度的计算[J].北京科技大学学报,2008,30(12):1432-1438. 被引量:13
  • 2吴胜利,陈辉,余晓波,徐健,王筱留.高炉理论燃烧温度计算的研究[J].钢铁,2008,43(9):16-19. 被引量:18
  • 3Ohno Y, Furukawa T, Matsu U M. Combustion Behavior of Pulverized Coal in a Raceway Cavity of Blast Furnace and Its Application to a Large Amount Injection [J]. ISIJ International, 1994, 34(8): 641.
  • 4张建良,杨天钧,高征铠,高斌,张宗旺,王丽华.高炉喷煤过程煤粉分解热确定的新方法[J].北京科技大学学报,2001,23(4):308-310. 被引量:13
  • 5Smoot D L, Smith J P. Coal Combustion and Gasification [M]. New York: Plenum Press, 1985.
  • 6JIN Yan-juan. Technology on Pulverized Coal Injection Into Blast Furnace [M]. Beijing: Metallurgical Industry Press, 2005.
  • 7FU Wei-biao. Combustion Theory of Coal and Its Macroscopic and General Rules [M]. Beijing: Tsinghua University Press, 2003.
  • 8Zelkowski J. Theory and Technology on Coal Combustion [M]. YUAN Jun-lu, ZHANG Pei-fang, trans. Shanghai: East China University of Science and Technology Press, 1990.
  • 9ZHOU Chuan-dian. Technologic Handbook of Iron-Making in Blast Furnace [M]. Beijing: Metallurgical Industry Press, 2002.
  • 10ZHANG Qian-xiang, FAN Xin-jie, QIN Song, et al. Study on Silicon Transfer in the Form of SiO Vapour to Molten Iron [J]. Iron and Steel, 1988, 23(8): 6.

二级参考文献28

  • 1梁中渝,殷利,沈甦,龚文渠,秦娜莎.富氧喷煤高炉能量变化的分析[J].钢铁,2005,40(1):16-19. 被引量:10
  • 2张生富,温良英,白晨光,陈登福,董凌燕,欧阳奇.高炉风口煤粉及回旋区焦炭燃烧过程数学模型[J].重庆大学学报(自然科学版),2005,28(8):42-45. 被引量:11
  • 3郭可中 李肇毅.宝钢高炉高煤比的新进展[J].钢铁,1999,34:147-147.
  • 4成兰伯.高炉炼铁工艺及计算[M].北京:冶金工业出版社,1993.427.
  • 5贺友多.炼铁学(上册)[M].北京:冶金工业出版社,1989.269.
  • 6郭可中 李肇毅.宝钢高炉高煤化新进展[J].钢铁,1999,(34):147-147.
  • 7梁英教.物理化学[M].北京:冶金工业出版社,1989..
  • 8李斯持.工程热力学原理.北京:化学工业出版社,1990.
  • 9王筱留,钢铁冶金学(炼铁部分),2000年,176页
  • 10王筱留,钢铁冶金学(炼铁部分),2000年,230页

共引文献32

同被引文献68

引证文献7

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部