期刊文献+

含有潜伏性催化剂的环氧树脂/酸酐体系的研究

Study on the system from epoxy resin/anhydride containing a latent catalyst
原文传递
导出
摘要 使用固态聚胺与疏水性微粒子WS-12制备出一种潜伏性催化剂,评价了该催化剂在环氧树脂/甲基六氢苯酐固化体系中的催化固化作用。在25~50℃的范围内本固化体系长时间黏度变化平稳,而在150℃以上时具有高效的催化效果,显示出该催化剂具有优异的潜伏功能。该催化固化体系能适合于各种黏度的环氧树脂,当使用一种低黏度环氧树脂时,即m(环氧树脂6002):m(甲基六氢苯酐):m(潜伏性催化剂)=100:70:3时,其固化物显示出最佳的力学性能。 A new latent catalyst has been prepared by a solid polyamine and hydrophobic particles WS-12, and catalysis effect of the latent catalyst on the curing system of epoxy resin and methyl hexahydro-phthalic anhydride (MHHPA) was evaluated.The results indicated that the viscosity of the curing system varied steady with long time at the range of 25 and 50℃,and the latent catalyst presented the high efficient catalysis effect above 150℃.Therefore,the latent catalyst had the excellent latent function.The catalysis system could be suitable for epoxy resin with various viscosity.The mechanical property of the cured resin is the best when m(epoxy resin 6002):m(MHHPA):m(catalyst) is 100:70:3.
出处 《精细与专用化学品》 CAS 2011年第12期31-33,共3页 Fine and Specialty Chemicals
关键词 潜伏性催化剂 复合微粒子 低黏度 环氧树脂/酸酐固化体系 力学性能 latent catalyst composite particles low viscosity epoxy resin/anhydride curing system mechanical property
  • 相关文献

参考文献6

  • 1苏祖君,曾金芳,王华强.酸酐固化环氧树脂用促进剂评述[J].热固性树脂,2004,19(5):35-38. 被引量:10
  • 2丁建良,俞亚君.酸酐类环氧固化剂的开发和应用[J].热固性树脂,1998,13(3):32-38. 被引量:18
  • 3Kamiya, Kazunobu. Thermosetting epoxy resin composition [P]. US 7851520, 2010-12-14.
  • 4Tanaka ,Ryusuke, Suzuki, Minoru. Epoxy resin curing agent produced by heating anhydride and polyester in presence of hydrogen and hydrogenation catalyst [P]. US 7790812, 2010-9-7.
  • 5Jayaraman,Saikumar, Manepalli, Rahul. Anhydride polymers for use as curing agents in epoxy resin-based underfill material [P]. US 7041736, 2006-5-9.
  • 6王重辉.疏水性二氧化硅的制备方法[P].CN 200710052453.9,2007-06-06.

二级参考文献17

共引文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部