摘要
To investigate the mechanical behavior of segmental lining,a three-dimensional numerical analysis and test using three actual segments were used to analyze the effects of axial force and reinforcement ratio on the failure mechanism and ultimate bearing capacity of segmental lining.Both numerical and test results confirmed that the cracking load,yield and ultimate load were strongly influenced by axial force,and it was also proved that the yield and ultimate load would increase with the increase of reinforcement ratio,but the cracking load was almost not affected.The cracking load,yield and ultimate load are about 28.7%,500% and 460% larger due to the effect of axial force respectively.The comparison between numerical calculation and test results showed that the finite element analysis results were in good agreement with the test results.
To investigate the mechanical behavior of segmental lining, a three-dimensional numerical analysis and test using three actual segments were used to analyze the effects of axial force and reinforcement ratio on the failure mechanism and ultimate bearing capacity of segmental lining. Both numerical and test results confirmed that the cracking load, yield and ultimate load were strongly influenced by axial force, and it was also proved that the yield and ultimate load would increase with the increase of reinforcement ratio, but the cracking load was almost not affected. The cracking load, yield and ultimate load are about 28.7%, 500% and 460% larger due to the effect of axial force respectively. The comparison between numerical calculation and test results showed that the finite element analysis resuits were in good agreement with the test results.
作者
周海鹰
陈廷国
李立新
ZHOU Haiying;CHEN Tingguo;LI Lixin(Faculty of Infrastructure Engineering,Dalian University of Technology,Dalian 116024,China;School of Civil Engineering,Shenyang Jianzhu University,Shenyang 110168,China)
基金
Supported by National Natural Science Foundation of China (No. 10902073)
