宽厚板试样剪自动定位控制优化

OPTIMIZATION OF AUTOMATIC POSITIONING CONTROL OF SAMPLE SHEAR

宽厚板试样剪作为样品剪切及运送的设备,安装在定尺剪的下游。它在实际使用过程中,由于钢板在传送链上打滑、滚轮磨损等原因,造成长度定位不稳定、长度过短等严重问题,难以实现有关技术功能规格以及生产控制的要求。因而准备对剪切过程定位控制功能进行改造,根据原有现场设备,优化了现阶段的控制方式。优化后的系统,满足生产控制的要求。

Thick plate sample shear was the equipment for transporting and cutting installed at the downstream of the fixed length shear. In actual using process, because of steel skidding during transmission chain and wheel wear, length positioning was instability and the length was too short, it was difficult to realize the technical functional specifications and production control requirements. Thus on - site preparations for transformation of shearing localization control function and the optimized system would meet the requirements of production control.