期刊文献+

确定碱式氯化镁纳米棒干燥动力学参数的新方法 被引量:1

A New Method of Determining the Drying Kinetics Parameters for Basic Magnesium Chloride Nanorods
下载PDF
导出
摘要 根据碱式氯化镁纳米棒干燥动力学实验数据,拟合得到的干燥方程为MR=exp[-(kt)n],干燥时间指数为n=1.8114,式中的干燥速率常数,k=Aexp(-CT/T)exp(-CLL)=Aexp[-(EV+RTCLL)/RT]=Aexp[-(EV+Ed)/RT]=Aexp(-E/RT),扩散活化能Ed=RTCLL,表观活化能E=EV+RTCLL。采用一种确定干燥动力学参数的新方法—等湿分比法,得到界面蒸发活化能为EV=15.399kJ·mol-1,长度常数CL=161.380m-1,温度常数CT=1852.177K,频率因子A=8.997min-1。 According to the experimental data of drying kinetics for basic magnesium chloride nanorods, the drying equation MR =exp[-(kt)n] and the drying index n=l.8114 were given, thereinto, the drying rate constant k = A exp(-CT / T) exp(-CLL) = .4 exp[-(Ev + RTCLL) / RT] = .4 exp[-(Ev + Ed) / RT] = A exp(-E / RT), the diffusion activation energy Ed = R TCLL ,the apparent activation energy E = Ev + R TCLL .Then, by using a new method which is called equal moisture ratio method to determine the drying kinetics parameters, the activation energy of interface evaporation Ev=15.399kJ-mol^-1 ,the length constant CL=161.380m^-1,the temperature constant Cr=1852.177K, and the frequency factor A= 8.997min^-1 were obtained.
出处 《干燥技术与设备》 CAS 2011年第6期308-314,共7页
关键词 碱式氯化镁 纳米棒 干燥速率常数 等湿分比 basic magnesium chloride nanorods drying rate constant equal moisture ratio
  • 相关文献

参考文献6

二级参考文献21

  • 1李春忠,古庆山,程起林,张玲.针状碱式氯化镁的合成及形态分析[J].华东理工大学学报(自然科学版),2005,31(3):314-318. 被引量:11
  • 2乃学瑛,叶秀深,崔香梅,李武.无机晶须研究进展Ⅲ:碱式硫酸镁晶须的制备及应用[J].盐湖研究,2005,13(3):22-28. 被引量:21
  • 3王世栋,褚敏雄,孙庆国.卤水-氨法碱式氯化镁晶须的制备及影响因素的研究[J].海湖盐与化工,2006,35(2):1-3. 被引量:4
  • 4Brian LC, Vladimir LK, Charles. Recent advances in liquid-phase syntheses of inorganic nanoparticles[J].Chem.Rev,2004,104: 3893 -3946.
  • 5Jeevanandam P, Mulukutla R S. Nanocrystals to nanorods: a precursor approach for the symhesis of magnesium hydroxide nanorods from magnesium oxychloride nanorods starting from nanocryslalline magnesium oxide[J]. Chem Mater, 2007, 19: 5395-5403.
  • 6Brian L C,Vladimir L K, Charles.Recent advances in liquid-phase syntheses of inorganic nanoparticles[J].Chem Rev,2004,104:3893-3946.
  • 7印万忠 丁亚卓 张丽荣 等.国内外镁盐晶须制备及应用现状及发展概况.中国非金属矿工业导刊,2007,:3-8.
  • 8叶瑛,陈雪刚,等.以白云石和苦卤为原料制备碱式氯化镁晶须的方法[P].中国专利:200810120549.9.
  • 9薛冬峰,邹龙江,闫小星,王雷,王晓丽.氧化镁晶须制备及影响因素考查[J].大连理工大学学报,2007,47(4):488-493. 被引量:13
  • 10王渝.[D].天津:河北工业大学,2002.

共引文献23

同被引文献12

  • 1M. Susana, S. Marocho, A. R. Studart, et al. Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics[J]. Dental Materials. 2010, 26(5):483-490.
  • 2F. Deng, W.B. Lu, H.B. Zhao, et al. The properties of dry-spun carbon nanotube fibers and their interfacial shear strength in an epoxy composite[J].Carbon,2011,49 (5): 1752- 1757.
  • 3S. Cox, S. Gupta, N. Abu-Ghannam. Effect of different rehydration temperatures on the moisture, content of phenolic compounds, antioxidant capacity and textural properties of edible Irish brown seaweed[J]. LWT - Food Science and Technology. 2012,47(2):300-307.
  • 4I. Mufioz, N. Garcia-Gil, J. Arnau, et al. Rehydration kinetics at 5 and 15~C of dry salted meat[J]. Journal of Food Engineering. 2012,110(3):465-471.
  • 5O. Corzo, N. Bracho, A. Pereira, et al. Weibull distribution for modeling air drying of coroba slices [J]. Food Science and Technology. 2008,41(10): 2023-2028.
  • 6M. Aghbashlo, M.H. Kianmehr, A. Arabhosseini. Modeling of thin-layer drying of apple slices in a semi-industrial continuous band dryer[J]. International Journal of Food Engineering. 2010,6(4): 1-15.
  • 7W. Weibull. A statistical distribution functions of wide applicability[J]. Journal of Applied Mechanics, 1951,18(3):293-297.
  • 8L.M. Cunha, F.A.R. Oliveira, J.C. Oliveira. Optimal experimental design for estimating the kinetic parameters of process described by the Weibull probability distribution function[J]. Journal of Food Engineering, 1998,37(2):175-191.
  • 9云利娜,王宝和,景殿策,吕晓明,王刚,徐强.不同形貌氢氧化镁微纳米结构的干燥动力学研究[J].干燥技术与设备,2008,6(1):13-18. 被引量:1
  • 10王秀兰,王宝和.氢氧化镁纳米棒的干燥动力学特性研究[J].化工机械,2009(3):234-238. 被引量:6

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部