期刊文献+

杂质对废塑料裂解产物及污染物排放的影响 被引量:7

Influence of Impurities on Waste Plastics Pyrolysis: Products and Emissions
原文传递
导出
摘要 从垃圾中分选出的废塑料混有大量杂质,杂质对现有废塑料裂解工艺有直接的影响.针对这一问题,对混有厨余、纸、织物和渣土等杂质的废塑料裂解产物和污染物排放进行了研究.同时检测和分析了厨余、纸、织物和沙土等常见杂质所含N、Cl、S元素向裂解油、裂解气中的迁移规律.研究表明,厨余的混入将对裂解油的产物产生严重不利影响,如热值降低至27 MJ/kg,油品的含水率高达25%以及多环芳烃含量大大提高,因而应在分选过程中除去.厨余、织物和纸张等杂质的混入导致裂解气体中污染物浓度的显著上升.渣土的混入对气体产物有有利影响,对油品无明显不利影响. The study is aimed to evaluate the impact of impurities like food waste, paper, textile and especially soil on the pyrolysis of waste plastics. For this purpose, emissions, gas and liquid products from pyrolysis of waste plastics and impurities were studied, as well as the transfer of element N, Cl, S from the substrates to the pyrolysis products. It was found that the presence of food waste would reduce the heat value of pyrolysis oil to 27 MJ/kg and increase the moisture in the liquid products, therefore the food residue should be removed from waste plastics; and the soil, enhance the waste plastics’ pyrolysis by improving the quality of gas and oil products. The presence of food residue, textile and paper leaded to higher gas emissions.
出处 《环境科学》 CAS CSCD 北大核心 2012年第1期329-336,共8页 Environmental Science
基金 “十一五”国家科技支撑计划项目(2008BAC46B06)
关键词 废塑料 裂解 产物 厨余 渣土 排放 waste plastics pyrolysis products food waste soil emissions
  • 相关文献

参考文献24

  • 1沈祥智,严建华,池涌,白丛生,温俊明,倪明江,岑可法.聚乙烯在连续给料外热式回转窑内的热解研究[J].中国电机工程学报,2006,26(16):126-132. 被引量:12
  • 2Knumann R, Bockhom H. Investigation of the kinetics of pyrolysis of PVC by TG-MS-analysis [ J ]. Combustion Science and Technology, 1994, 101(1-6) : 285-299.
  • 3Faravelli T, Bozzano G, Colombo M, et al. Kinetic modeling of the thermal degradation of polyethylene and polystyrene mixtures [ J ]. Journal of Analytical and Applied Pyrolysis, 2003,70 (2) : 761-777.
  • 4Zevenhoven R, Axelsen E P, Hupa M. Pyrolysis of waste-derived fuel mixtures containing PVC [J]. Fuel, 2002, 81 (4) : 507- 510.
  • 5Phan A N, Ryu C, Sharifi V N, et al. Characterisation of slow pyrolysis products from segregated wastes for energy production [ J]. Journal of Analytical and Applied Pyrolysis, 2008, 81 ( 1 ) : 65-71.
  • 6Lopez A, de Marco I, Caballero B M, et al. Pyrolysis of municipal plastic wastes: Influence of raw material composition [J]. Waste Management, 2010, 30(4): 620-627.
  • 7Pinto F, Costa P, Gulyurtlu I, et al. Pyrolysis of plastic wastes 1. Effect of plastic waste composition on product yield [ J ] Journal of Analytical and Applied Pyrolysis, 1999, 51 (1- 2) 39-55.
  • 8栾建.废塑料裂解特性及油化过程中物料的适应性研究[D].上海:同济大学,2010.
  • 9Horne P A, Williams P T. Influence of temperature on the products from the flash pyrolysis of biomass [J]. Fuel, 1996, 75 (9): 1051-1059.
  • 10Al-Salem S M, Lettieri P, Baeyens J. Recycling and recovery routes of plastic solid waste (PSW) : a review [ J ]. Waste Management, 2009, 29(10): 2625-2643.

二级参考文献38

共引文献98

同被引文献82

引证文献7

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部